Loading ...
Loading ...
Loading ...
10
C – Sapphire disk, fine
Filing and treatment of the nails, fine grained sapphire disk.
The specific aspect of this sapphire disk is that only the inner disk ro
-
tates, while the outer support is stationary. This enables precise filing of
the nails without the risk of burning the skin with the fast rotating disk.
D – Cylindrical milling cutter
Grinding of lignified foot nail surfaces as well as smoothing of these.
For this purpose, apply the milling cutter horizontally to the nail surface
and remove the unwanted layer of nail using slow circular movements.
E – Flame milling cutter
For removing ingrowing nails. Carefully guide the flame cutter up to the
part to be treated and remove parts of the nail as necessary.
F – Sapphire milling cutter, round
This accessory attachment is for the careful removal of corns. When
using this attachment, please remember when removing the layer of
skin from the corn that you will quickly penetrate deeper into the skin
and this could injure the periosteum.
When filing, always work from the outside of the nail towards the tip!
Always check results regularly during treatment. As soon as the application becomes un-
pleasant, stop the treatment.
4. Cleaning
Before cleaning the power unit, always unplug it from the socket outlet!
– Clean the instrument with a slightly moistened cloth. You can also moisten the cloth with mild
soap suds to remove more stubborn dirt.
– If necessary, for reasons of hygiene, the attachments can be cleaned with a cloth or brush
moistened with alcohol. Dry them carefully afterwards.
– Do not drop the instrument.
– Make sure that no water enters the instrument. But if this should happen, do not use the
instrument again until it is completely dry.
– Do not use chemical detergent or scouring agents for cleaning.
– Never immerse the instrument or plug-in power unit in water or other liquids.
5. Technical data
Power unit voltage Input: 100-240V AC / 50/60Hz / 0.3A
Output: 21V DC / 300 mA
Speed: 2400-6100 r.p.m
12%
6. Disposal
For environmental reasons, do not dispose of the device in the household waste at the end of
its useful life. Dispose of the unit at a suitable local collection or recycling point. Dispose of
the device in accordance with EC Directive – WEEE (Waste Electrical and Electronic Equip
-
ment). If you have any questions, please contact the local authorities responsible for waste
disposal.
Subject to errors and changes
Loading ...
Loading ...
Loading ...