Loading ...
Loading ...
Loading ...
Other Information
41
Cannot receive
higher number
channels (UHF)
when using an
antenna
Make sure Cable is set to OFF in the Channel Setup
menu (page 26).
Perform Auto Program to add channels that are not
presently in the memory (page 17).
Cable stations
don’t seem to
work
Make sure Cable is set to ON in the Channel Setup
menu (page 26).
Perform Auto Program to add channels that are not
presently in the memory (page 17).
Remote control
does not
operate
Batteries could be weak. Replace them (page 2).
Move the TV 3-4 feet away from fluorescent lights.
Cannot change
channels with
the remote
control
Make sure you have not inadvertently switched your
TV from the channel 3 or 4 setting if you are using
another device to change channels.
If you are using another device to control channels, be
sure the FUNCTION button for that device has been
pressed. For example, if you’re using your VCR to
control channels, be sure to press the VTR/DVD
FUNCTION buttons (page 15).
The TV needs
to be cleaned
Clean the TV with a soft dry cloth. Never use strong
solvents such as thinner or benzine, which might
damage the finish of the cabinet.
Lost password
for Parental
Control
In the password screen, enter the following master
password: 4357. After using the master password, you
must create a new password; it cannot be used to
unlock currently blocked channels.
Cannot access
other menus
when using the
Basic Menu
If you use the button to close the Basic menu, only
the Basic menu appears when you press
again. To
have access to the other menus, use the
button to
select Advanced Menu (page 36).
The remote
control won’t
work in PIP
mode
Press the TV FUNCTION button. You may have
inadvertently pressed the VTR/DVD FUNCTION
button, which changes the PIP buttons to VCR mode
(page 15).
F
Loading ...
Loading ...
Loading ...