Loading ...
Loading ...
Loading ...
Fault, what to do? aus
43
Error code “:ƒˆ is lit. Mains voltage too low. Not an appliance fault, have the mains
voltage and electrical installation checked.
A different error code is
indicated on the digital
display.
(“:‹‚ to “:„‹)
A technical fault has probably
occurred.
Switch off appliances with the ON/OFF
switch (. After a short time restart the
appliance.
If the problem recurs, turn off the tap and
pull out the mains plug.
Call customer service and mention the
error code.
Home network is not
loading.
WLAN is not active on the router. Check the wireless network connection of
your router.
WLAN display flashes. Connection to the home network
is not available.
Activate the wireless network on your
router.
Home Connect cannot be
implemented correctly.
Possible setting errors or a
technical fault.
Observe the supplied documents and
support information for Home Connect.
Energy manager does not
connect to the energy
manager of the home
system. *
Connection to the energy
manager of the home system is
not available.
Refer to the instructions for use from the
energy manager manufacturer for your
home system.
Refill indicator for rinse-aid
H is lit.
No rinse aid. Refill rinse aid.
Refill indicator for rinse-aid
H is not lit.
Refill indicator switched off. Activation/deactivation.~ "Rinse aid"
on page 20
There is still enough rinse aid
available.
Check refill indicator, levels.
Water is left in the
appliance at the end of the
programme.
Filter system or area under the
filters 1b is blocked.
Clean filters and area underneath.
Program has not ended yet. Wait until programme ends or reset.
Fault Cause Remedial action
* Depending on the features of your dishwasher
Loading ...
Loading ...
Loading ...