Loading ...
Loading ...
Loading ...
8
en
A250 AQUA PRO PREPARATION
1. Remove the packaging of the BONECO A250 AQUA
PRO.
2. Rinse the A250 AQUA PRO for 2 minutes under cold
running water.
3. Screw the A250 AQUA PRO to the BONECO U330.
ON WATER HARDNESS
The BONECO U330 is supplied with an A250 AQUA PRO.
The granulate contained in it filters the lime out of the tap
water so that it is not released into the room air. Hard tap
water accelerates saturation of the granulate so that the
A250 AQUA PRO must be replaced earlier.
DETERMINING WATER HARDNESS
1. Dip the enclosed test strip into a glass of cold tap
water for 1 second.
2. Read the water hardness after one minute.
3. Refer to the table to determine the duration of effect
of the A250 AQUA PRO:
Dispose of the saturated A250 AQUA PRO with your regu-
lar household waste.
The A250 AQUA PRO should not be used longer than
specified. White dust around the appliance is a sure indi-
cation that the A250 AQUA PRO has run its course. You
can obtain replacements from your BONECO specialist
dealer or our online store at www.shop.boneco.us
= 6 months
= 6 months
= 5 months
= 4 months
= 3 months
= 2 months
PREPARATION OF THE A250 AQUA PRO
Loading ...
Loading ...
Loading ...