Loading ...
Loading ...
Loading ...
USING YOUR REFRIGERATOR
CAUTION
To reduce the risk of scratching
the door or breaking the door
mullion, make sure that the
refrigerator door mullion is
always folded in.
Articulating Mullion
This feature is a metal strip attached to the left door
that articulates (rotates) 90 degrees as the door is
closed, forming a mullion (base) for the left and right
door gaskets to seal against.
Air Filter
The Air Filter helps remove odors from the
refrigerator. The Air Filter has two settings, Auto and
MAX. In Auto mode, the Air Filter will cycle on and
off in increments of ten minutes on and 110 minutes
off. If set to the M AX mode, the Air Filter will stay
on continuously for four hours, cycling on and off in
increments of ten minutes on and five minutes off.
After four hours, the Air Filter will switch to Auto
mode.
Auto mode is the default mode. (Max LED off)
•
Press the
•
Air Filter button once for Max mode.
(Max LED on)
Air Filter Reset
Control Lock
Door Alarm
When the “CHANGE” icon turns on, the air filter needs
to be replaced. After replacing the air filter, press
and hold the Air Filter button for three seconds to turn
the icon light off. Change the air filter approximately
every 6 months.
Temperature Mode Switch Function (°F <->°C)
To convert °F to °C or vice versa, press and hold the Freezer
Temp and Refrigerator Temp buttons at the same time for
approximately five seconds.
Demo Mode (For Store Use Only)
To Deactivate Demo Mode:
With either refrigerator door opened, press and hold the
Refrigerator Temp and
Accela Ice
buttons at the same
time for five seconds. The control panel will beep and the
temperature settings will display to confirm that Demo
Mode is deactivated. Use the same procedure to activate
the Demo Mode .
The Demo Mode disables all cooling in the refrigerator
and freezer sections to conserve energy while on display
in a retail store. When activated, OFF will display on the
control panel.
20
•
When power is initially connected to the refrigerator,
the Lock
•
To lock the controls, press and hold the Control Lock
button for three seconds until the LED illuminates and
the function is enabled.
•
When the Lock function is activated, no other buttons
will work.
•
To disable the Lock function, press and hold the Control
Lock button for approximately three seconds.
•
When power is connected to the refrigerator, the door
alarm is initially set to ON. To deactivate the Door
Alarm function, press the Door Alarm button.
(The LED turns off.)
When either the refrigerator or the freezer door is left
open for more than 60 seconds, the alarm tone will
sound to let you know that the door is open.
Close the doors to stop the alarm.
Loading ...
Loading ...
Loading ...