Loading ...
Loading ...
Loading ...
31
LED LIGHTING UNIT
• LED lights must be replaced by Faber factory
authorized service.
Cleaning metal grease lters
These can be washed in the dishwasher, and need
to be cleaned whenever the S1 Led comes on or at
least once every 2 months use, or more frequently if
use is particularly intensive.
Resetting the alarm signal
• Turn the Lights and the Suction Motor off.
• Press T3 and hold for at least 3 seconds, until LED
ashes three times in conrmation.
Cleaning
• Remove the lter, pushing the lever towards the back
of the unit and at the same time pulling downward.
• Wash the lter without bending it, leave it to dry
thoroughly before replacing (if the surface of the lter
changes color over time, this will have absolutely
no effect on its efciency).
• Replace, taking care to ensure that the handle
faces forward.
• No water can be present in lters before installing
back in hood.
Replacing Activated Charcoal Filter
This cannot be washed or regenerated, and must
be changed when led S1 starts to ash, or at least
once every 4 months. The Alarm signal, if it has been
activated, only appears when the Suction motor is
turned on.
Resetting the alarm signal
• Turn the Lights and the Suction Motor off.
• Press T3 and hold for at least 3 seconds, until LED
ashes three times in conrmation.
Cleaning
• Remove the charcoal lter by rotating it clockwise
(backwards) until it unlocks from the motor housing
and pull off sideways.
• To re-insert each charcoal lter, place up against
the side of the blower and push it inward. Then
turn the charcoal lter clockwise (forward) until it
ts into place.
• CAUTION: When used in recirculation mode, to
Reduce the Risk of Fire and Shock use only con-
version kit Model FILTER 1 or FILTER1LL.
Loading ...
Loading ...
Loading ...