Loading ...
Loading ...
Loading ...
INSTALLATION INSTRUCTIONS
5
WATER SUPPLY
Water can be supplied to the appliance in two
different ways, either through the Quick Connect
assembly or through direct hose connection,
depending on what water hook ups are available
to use. Water supply faucets must fi t standard 3/4
inch (19.05 mm) female garden hose couplings.
Do not use slip-on or clamp-on connections as the
water pressure may cause them to leak.
1
2
3
4
5
6
1. Faucet Adapter
2. Locking Collar
3. Inlet Hose Connection
4. Drain Hose Connection
5. Pressure Release Valve
6. Quick Connect Assembly
Note: The drain hose connection on the Quick
Connect assembly is only for use with counter top
dishwashers. When using the Quick Connect with a
portable dishwasher or washing machine, leave the
cap in place, this connection is not necessary.
Using a Direct Hose Connection
This appliance can be directly connected to the
water supply using the steps below.
Connect the inlet hoses to the hot and cold faucets.
Ensure that there are rubber gaskets in the
connections to avoid leaks.
Attach the other end of the water inlet hoses to
the hot and cold water connections on the back of
the appliance. Ensure that hot is connected to hot
and cold is connected to cold. Ensure that there
are rubber gaskets inside the connections to avoid
leaks.
Using the Quick Connect Assembly
The Quick Connect assembly can be used to provide
water to the appliance when only one faucet is
available. The Quick Connect must be connected
to the cold water faucet and the inlet hose must be
connected to the cold water inlet on the back of the
appliance.
Note: When using the Quick Connect assembly,
only cold water can be used.
A breakdown of the Quick Connect assembly is
below.
Loading ...
Loading ...
Loading ...