User Manual KSM3311XAQ KitchenAid Stand Mixers

KSM3311XAQ KitchenAid Stand Mixers - Use Manual - Use Guide PDF.
Documents: Go to donwload!
  • Owner's manual - (English)



2 | PARTS AND FEATURES

PARTS AND FEATURES

PARTS AND ACCESSORIES

Pouring shield*

Flex Edge beater*

Wire whip

Dough hook

Speed control

+ Select models only and accessories sold separately.

+* Bowl type may vary. Bowls are also available for purchase as separate accessories.

Motor head

Attachment hub

Beater shaft

Flat beater*

Bowl**

W10882018AENv05.indd 2 4/20/16 3:27 PM

ENGLISH

STAND MIXER SAFETY | 3

STAND MIXER SAFETY

IMPORTANT SAFEGUARDS

When using electrical appliances. basic safety precautions should always be followed. including the following:

1. Read all instructions.

2. To avoid risk of electrical shock. do not put Stand Mixer in water or other liquid.

3. Close supervision is necessary when any appliance is used by or near children.

4. Unplug the Stand Mixer from outlet when not in use. before putting on or taking off parts. and before cleaning.

5. Avoid contacting moving parts. Keep hands. hair. and clothing. as well as spatulas and other utensils. away from beater during operation to reduce the risk of injury to persons and/or damage to the Stand Mixer.

6. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or has been damaged in any manner. Return appliance to the nearest Authorized Service Facility for examination. repair or adjustment.

7. The use of accessories not recommended or sold by KitchenAid may cause fire. electric shock or injury.

8. Do not use the Stand Mixer outdoors.

9. Do not let the cord hang over the edge of table or counter.

Flat beater*

Bowl**

W10882018AENv05.indd 3 4/20/16 3:27 PM

4 | USING THE STAND MIXER

STAND MIXER SAFETY

10. Do not let the cord contact hot surfaces. including the stove.

11. Remove the flat beater. wire whip. or spiral dough hook from the Stand Mixer before washing.

SAVE THESE INSTRUCTIONS THIS PRODUCT IS DESIGNED FOR HOUSEHOLD USE ONLY.

ELECTRICAL REQUIREMENTS

Voltage: 120 V

Frequency: 60 Hz

Wattage: 250 Watts

NOTE: The power rating for your Stand Mixer is printed on the serial plate.

Do not use an extension cord. If the power supply cord is too short. have a qualified electrician or serviceman install an outlet near the appliance.

The maximum rating is based on the attachment that draws the greatest load (power). Other recommended attachments may draw significantly less power.

USING THE STAND MIXER

CHOOSING THE RIGHT ACCESSORY

ACCESSORY USE TO MIX DESCRIPTION

FLAT BEATER* FLEX EDGE BEATER*

Normal to heavy mixtures

Cakes. Creamed frostings. Candies.

Cookies. Biscuits. Pie pastry. Meat loaf.

Mashed potatoes

WIRE WHIP Mixtures that need air incorporated

Eggs. Egg whites. Heavy cream.

Boiled frostings. Sponge cakes.

Mayonnaise. some Candies

DOUGH HOOK Mixing and kneading yeast doughs

Breads. Rolls. Pizza dough. Buns

+ Select models only and accessories sold separately.

W10882018AENv05.indd 4 4/20/16 3:27 PM

ENGLISH

USING THE STAND MIXER | 5

FOR DETAILED INFORMATION ON USING THE STAND MIXER:

Visit kitchenaid.com/quickstart for additional Instructions with videos. inspiring recipes. and tips on how to use your Stand Mixer.

USING THE STAND MIXER

SPEED CONTROL GUIDE

All speeds have the Soft Start feature which automatically starts the Stand Mixer at a lower speed to help avoid ingredient splash-out and “flour puff” at start-up. then quickly increases to the selected speed for optimal performance.

NOTE: The speed control can be set between the speeds listed in the chart to obtain speeds 1. 3. 5. 7. and 9 if a finer adjustment is required. Do not exceed Speed 2 when preparing yeast doughs as this may cause damage to the Stand Mixer.

SPEED ACCESSORY ACTION DESCRIPTION

STIR For starting all mixing procedures. slow stirring. combining. and mashing. Use to add flour and dry ingredients to batter. and to add liquids to dry ingredients.

Do not use Speed 1 to mix or knead yeast doughs.

SLOW MIXING For slow mixing. mashing. and faster stirring. Use to mix and knead yeast doughs. heavy batters. and candies; start mashing potatoes or other vegetables; cut shortening into flour; mix thin or splashy batters.

MIXING.

BEATING For mixing semi-heavy batters. such as cookies. Use to combine sugar and shortening. and to add sugar to egg whites for meringues. Medium speed for cake mixes.

BEATING.

CREAMING For medium-fast beating (creaming). or whipping. Use to finish mixing cake. doughnut. and other batters. High speed for cake mixes.

FAST BEATING.

WHIPPING For whipping cream. egg whites. and boiled frostings.

FAST WHIPPING For whipping small amounts of cream. or egg whites; for final whipping of mashed potatoes.

NOTE: To move the speed control lever with ease. lift slightly up as you move it across the settings in either direction.

W10882018AENv05.indd 5 4/20/16 3:27 PM

6 | USING THE STAND MIXER

USING THE STAND MIXER

ASSEMBLING THE STAND MIXER

Check to be sure that the Stand Mixer is unplugged. and the speed control is turned to “0”.

Raise the motor head: Slide the locking lever to the unlock position and lift the motor head. Once lifted. slide the locking lever to the lock position to keep the motor head up.

Attach the bowl: Place the bowl on the bowl clamping plate and gently turn it in a clockwise direction to lock it into place.

Attach any accessory: Slip the accessory onto the beater shaft and press upward as far as possible. Turn the accessory counterclockwise to hook the accessory over the pin on the shaft.

NOTE: To move the speed control lever with ease. lift slightly up as you move it across the settings in either direction.

W10882018AENv05.indd 6 4/20/16 3:27 PM

ENGLISH

USING THE STAND MIXER | 7

USING THE STAND MIXER

IMPORTANT: Your Stand Mixer is adjusted at the factory so that the flat beater just clears the bottom of the bowl. If. for any reason. the flat beater hits the bottom of the bowl or is too far away from the bowl. you can easily correct the clearance.

NOTE: When properly adjusted. the flat beater will not strike on the bottom or sides of the bowl. If the flat beater or the wire whip is so close that it strikes the bottom of the bowl. coating may wear off the beater or wires on the whip may wear.

ASSEMBLING THE STAND MIXER

(OPTIONAL) To adjust beater to bowl clearance: Tilt the motor head back; then turn the screw slightly counterclockwise (left) to raise the beater. or clockwise (right) to lower the beater. Adjust the beater so that it just clears the surface of the bowl. If you over adjust the screw. the bowl lock lever may not lock into place.

(OPTIONAL) Place the pouring shield*: Slide the pouring shield* from the front of the Stand Mixer over the bowl until the pouring shield* is centered. The bottom rim of the pouring shield* fits inside of the bowl.

The pouring chute will be just to the right of the attachment hub as you face the Stand Mixer.

Lower the motor head: Slide the locking lever to the unlock position and guide the motor head down.

Make sure motor head is completely down. then slide the locking lever to the lock position. Before mixing. test lock by attempting to raise motor head.

+ Select models only and accessories sold separately.

W10882018AENv05.indd 7 4/20/16 3:27 PM

8 | USING THE STAND MIXER

USING THE STAND MIXER

OPERATING THE STAND MIXER

NOTE: The Stand Mixer may warm up during use. Under heavy loads with extended mixing time. the top of the unit may become hot. This is normal.

Plug the Stand Mixer into a grounded 3 prong outlet. Always set the speed control lever on lowest speed to start. then gradually increase speed to avoid splashing ingredients. See the “Speed control guide” to select the best speed for your recipe.

Do not scrape the bowl while the Stand Mixer is operating.

The bowl and beaters are designed to provide thorough mixing without frequent scraping. Scraping the bowl once or twice during mixing is usually sufficient.

NOTE: To move the speed control lever with ease. lift slightly up as you move it across the settings in either direction.

W10882018AENv05.indd 8 4/20/16 3:27 PM

ENGLISH

USING THE STAND MIXER | 9

USING THE STAND MIXER

DISASSEMBLING THE STAND MIXER

NOTE: The pouring shield* can be used to avoid ingredients splashing out of the bowl when mixing as well as to easily pour ingredients in the bowl while mixing.

Raise the motor head: Check to be sure that the Stand Mixer is unplugged. and the speed control is turned to “0”; then slide the locking lever to the unlock position and lift the motor head. Once lifted. slide the locking lever to the lock position to keep the motor head up.

(OPTIONAL) Remove the pouring shield*: Lift the front of the pouring shield* clear of the rim of the bowl. and pull away from the Stand Mixer.

Remove the accessory: Turn the speed control to “0”. unplug the Stand Mixer. and tilt the motor head back; then. press the accessory upward as far as possible. turn the accessory clockwise and pull it away from the beater shaft.

Remove the bowl: Gently turn the bowl counterclockwise to release it from the bowl clamping plate.

(OPTIONAL) Pour ingredients into the bowl through the pouring chute.

+ Select models only and accessories sold separately.

W10882018AENv05.indd 9 4/20/16 3:27 PM

10 | USING THE STAND MIXER

USING THE STAND MIXER

OPTIONAL ATTACHMENTS

KitchenAid offers a wide range of optional attachments such as the spiralizer. pasta cutters. or food grinder that may be attached to the Stand Mixer attachment power hub as shown here.

Check to be sure that the Stand Mixer is unplugged. and the speed control is turned to “0”.

Turn the attachment knob counterclockwise to remove attachment hub cover.

Insert attachment into attachment hub. making certain that attachment power shaft fits into the square attachment hub socket. It may be necessary to rotate the attachment back and forth. When it is in the proper position. the pin on the attachment will fit into the notch on the hub rim.

Tighten the attachment knob by turning it clockwise until the attachment is completely secured to the Stand Mixer. See the Instructions manual that came with your attachment for detailed directions on using the attachment.

W10882018AENv05.indd 10 4/20/16 3:27 PM

ENGLISH

CARE AND CLEANING | 11

CARE AND CLEANING

CLEANING THE STAND MIXER

IMPORTANT: Do not wash the wire whip in the dishwasher. Do not immerse the Stand Mixer body in water or other liquids. These parts should be hand washed.

FOR DETAILED INFORMATION ON CLEANING THE STAND MIXER:

Visit kitchenaid.com/quickstart for additional Instructions with videos. inspiring recipes. and tips on how to use your Stand Mixer.

Turn Stand Mixer off and unplug before cleaning. Wipe the Stand Mixer body with a soft. damp cloth.

Do not use household/commercial cleaners. Wipe off the beater shaft frequently to remove any accumulation of residue. Do not immerse in water.

The bowl. flat beater. dough hook.

Flex Edge beater. and pouring shield* may be washed in a dishwasher (top shelf only); or. clean them thoroughly in hot. sudsy water and rinse completely before drying. Do not store beaters on the shaft.

The wire whip is not dishwasher safe.

Clean it thoroughly in hot. sudsy water and rinse completely before drying. Do not store the wire whip on the shaft.

+ Select models only and accessories sold separately.

W10882018AENv05.indd 11 4/20/16 3:27 PM

12 | TROUBLESHOOTING

TROUBLESHOOTING

If your Stand Mixer should malfunction. please check the following:

1. The Stand Mixer may warm up during use. Under heavy loads with extended mixing time periods. you may not be able to comfortably touch the top of the unit. This is normal.

2. The Stand Mixer may emit a pungent odor. especially when new. This is common with electric motors.

3. If the flat beater hits the bowl. stop the Stand Mixer. See the “Assembling the Stand Mixer” section and adjust the beater to bowl clearance.

4. The speed control lever does not move smoothly or easily.

To move the speed control lever with ease. lift slightly up as you move it across the settings in either direction.

5. If your Stand Mixer should fail to operate. please check the following:

• Is the Stand Mixer plugged in?

• Is the fuse in the circuit to the Stand Mixer in working order? If you have a circuit breaker box. be sure the circuit is closed.

• Turn off the Stand Mixer for 10-15 seconds. then turn it back on. If the Stand Mixer still does not start. allow it to cool for 30 minutes before turning it back on.

If the problem cannot be corrected: See the “Warranty and service” section.

Do not return the Stand Mixer to the retailer; retailers do not provide service.

W10882018AENv05.indd 12 4/20/16 3:27 PM

ENGLISH

WARRANTY AND SERVICE | 13

WARRANTY AND SERVICE

KITCHENAID STAND MIXER WARRANTY FOR THE 50 UNITED STATES. THE DISTRICT OF COLUMBIA.

PUERTO RICO. AND CANADA

This warranty extends to the purchaser and any succeeding owner for Stand Mixers operated in the 50 United States. the District of Columbia. Puerto Rico. and Canada.

Length of Warranty: One Year Full Warranty from date of purchase.

KitchenAid Will Pay for Your Choice of:

Hassle-Free Replacement of your Stand Mixer. See the next page for details on how to arrange for service. or call the Customer eXperience Center toll-free at 1-800-541-6390.

OR The replacement parts and repair labor costs to correct defects in materials and workmanship. Service must be provided by an Authorized KitchenAid Service Center.

KitchenAid Will Not Pay for: A. Repairs when your Stand Mixer is used in other than normal single family home use.

B. Damage resulting from accident. alteration. misuse or abuse.

C. Any shipping or handling costs to deliver your Stand Mixer to an Authorized Service Center.

D. Replacement parts or repair labor costs for Stand Mixer attachments operated outside the 50 United States. District of Columbia. Puerto Rico. and Canada.

DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES IMPLIED WARRANTIES. INCLUDING TO THE EXTENT APPLICABLE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. ARE EXCLUDED TO THE EXTENT LEGALLY PERMISSIBLE. ANY IMPLIED WARRANTIES THAT MAY BE IMPOSED BY LAW ARE LIMITED TO ONE YEAR. OR THE SHORTEST PERIOD ALLOWED BY LAW. SOME STATES AND PROVINCES DO NOT ALLOW LIMITATIONS OR EXCLUSIONS ON HOW LONG AN IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS LASTS. SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU.

IF THIS PRODUCT FAILS TO WORK AS WARRANTED. CUSTOMER’S SOLE AND EXCLUSIVE REMEDY SHALL BE REPAIR OR REPLACEMENT ACCORDING TO THE TERMS OF THIS LIMITED WARRANTY. KITCHENAID AND KITCHENAID CANADA DO NOT ASSUME ANY RESPONSIBILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. This warranty gives you specific legal rights and you may also have other rights which vary from state to state or province to province.

W10882018AENv05.indd 13 4/20/16 3:27 PM

14 | WARRANTY AND SERVICE

®/ © 2016 KitchenAid. All rights reserved. KITCHENAID and the design of the Stand Mixer are trademarks in the U.S. and elsewhere. Used under license in Canada.

In the United States and Puerto Rico: For service information. or to order accessories or replacement parts. call toll-free at 1-800-541-6390 or write to: Customer eXperience Center.

KitchenAid Small Appliances.

P.O. Box 218. St. Joseph. MI 49085-0218

Outside the United States and Puerto Rico: Consult your local KitchenAid dealer or the store where you purchased the Stand Mixer for information on how to obtain service.

For service information in Canada: Call toll-free 1-800-807-6777.

For service information in Mexico: Call toll-free 01-800-0022-767.

We’re so confident the quality of our products meets the exacting standards of KitchenAid that. if your Stand Mixer should fail within the first year of ownership. KitchenAid will arrange to deliver an identical or comparable replacement to your door free of charge and arrange to have your original Stand Mixer returned to us. Your replacement unit will also be covered by our one year limited warranty.

If your Stand Mixer should fail within the first year of ownership. simply call our

We’re so confident the quality of our products meets the exacting standards of the KitchenAid brand that. if your Stand Mixer should fail within the first year of ownership. we will replace your Stand Mixer with an identical or comparable replacement. Your replacement unit will also be covered by our one year limited warranty.

If your Stand Mixer should fail within the first year of ownership. simply call our toll-free Customer eXperience Center

WARRANTY AND SERVICE

HASSLE-FREE REPLACEMENT WARRANTY – 50 UNITED STATES.

DISTRICT OF COLUMBIA. AND PUERTO RICO

HASSLE-FREE REPLACEMENT WARRANTY – CANADA

ARRANGING FOR SERVICE AFTER THE WARRANTY EXPIRES.

OR ORDERING ACCESSORIES AND REPLACEMENT PARTS

W10882018AENv05.indd 14 4/20/16 3:27 PM

W10882018A 04/16

DISCOVER MORE AND REGISTER YOUR PRODUCT.

DÉCOUVREZ DE NOUVELLES CHOSES ET ENREGISTREZ VOTRE PRODUIT.

DESCUBRA MÁS Y REGISTRE SU PRODUCTO.

KITCHENAID.COM/QUICKSTART

®/ © 2016 KitchenAid. All rights reserved. KITCHENAID and the design of the Stand Mixer are trademarks in the U.S. and elsewhere. Used under license in Canada.

®/ © 2016 KitchenAid. Tous droits réservés. La forme du batteur sur socle est une marque de commerce aux É.-U. et ailleurs. Utilisé sous licence au Canada.

®/ © 2016 KitchenAid. Todos los derechos reservados. El diseño de la batidora con base es una marca registrada en EE.UU. y en otras partes. Usada en Canadá bajo licencia.

PRODUCT QUESTIONS OR RETURNS

QUESTIONS SUR LE PRODUIT OU LES RETOURS

PREGUNTAS SOBRE EL PRODUCTO O DEVOLUCIÓNES

USA: 1.800.541.6390 | KitchenAid.com CANADA: 1.800.807.6777 | KitchenAid.ca

W10882018ASPv02.indd 48 4/22/16 9:24 AM



Newest Added: WMH1164XVS MMV1153WS WMH1163XVB GH5184XPQ MERH661WS

Tags: KitchenAid Stand Mixers User Manuals, KitchenAid Stand Mixers Use Manual

KitchenAid KSM3311XAQ | File type: PDF | Filename: 52806761_ksm3311xaq.pdf | Size: 5.13 MB | Language: English

Download User Manual

Product Infomation and Reviews - KSM3311XAQ photo

KSM3311XAQ Photo

View more photos

KitchenAid in United States

1 (800) 422-1230, 1 (800) 541-6390 Hours of Operation Mon - Fri: 8 a.m. - 8 p.m. EST