Loading ...
Loading ...
Loading ...
EN-13
ENGLISH
Wipe with a dry, soft cloth
Remove the dust gently with a
cleaning tool such as a vacuum
cleaner.
MAIN UNIT / BACK PANEL
Back panel
(Pre-filter)
• To maintain optimum performance of this air puri er, please clean the product including
the lter periodically.
• Be sure to stop operation and unplug the product before any maintenance or replacing
accessories.
FILTER MAINTENANCE INDICATOR
The filter maintenance indicator light will turn on* when it is time to maintain the back panel (pre-filter) .
*This indicator light will turn on after approximately 720 hours operating. (30 days × 24 hours = 720 hours)
After maintenance, connect the power plug to the wall outlet and press POWER ON/OFF button, then TIMER
button for 3 seconds.
MAINTENANCE
RESET
Press for 3 sec.
Turn off
How to clean hard to remove dirt.
Back panel
1. Add a small amount of neutral detergent to
water and soak for about 10 minutes.
Do not apply excessive pressure when
scrubbing the back panel.
2. Rinse off the neutral detergent with clean water.
3. Completely dry the filter in a wellventilated area.
Sensor lter
1. Remove the back panel.
2. Remove the sensor filter.
3. If the sensor filter is very dirty, wash it
with water and dry it thoroughly.
Sensor
filter
NOTE
CARE AND MAINTENANCE 1
♪
When the filter maintenance
indicator light turns on.
FX-J80U_2nd_EN.indd 13 2019/12/20 14:34:50
Loading ...
Loading ...
Loading ...