Loading ...
Loading ...
Loading ...
Charging
Charge AirFloss Pro for 24 hours before rst use.
1 Put the plug of the charger in the electrical outlet (Fig. 2).
2 Place the handle on the charger (Fig. 3).
, The charge indicators ash green to indicate that your AirFloss Pro
is charging (Fig. 4).
Note: When it is fully charged, AirFloss Pro has an operating time of up to
11 days when it is used in triple burst mode, and up to 33 days when it is
used in single burst mode.
Note: When the charge indicators ash yellow, the battery is low and needs to
be recharged (fewer than 3 uses left).
Getting started
1 Align the nozzle so the tip faces the front of the handle and press
the nozzle down onto the handle (‘click’) (Fig. 5).
Note: Replace the nozzle every 6 months for optimal results. Also replace
the nozzle if it becomes loose or no longer ‘clicks’ onto the handle.
Note: The AirFloss Pro only supports AirFloss Pro nozzles. Do not attempt to
use non-AirFloss Pro nozzles tips on the AirFloss Pro handle.
2 Open the cover of the reservoir (‘click’) (Fig. 6).
3 Fill the reservoir with mouthwash or water (Fig. 7).
Tip: For the best result and a fresher experience, we advise you to use
mouthwash with your AirFloss Pro.
Note: Do not use mouthwash that contains isopropyl myristate (e.g. Dentyl Active)
or high concentrations of essential oils, as it may damage the product.
4 Close the cover of the reservoir by pressing (‘click’) (Fig. 8).
5 Press the power on/off button to turn on the product. (Fig. 9)
, The LEDs illuminate.
6 Press and hold the activation button until spray comes out of
the tip of the nozzle (Fig. 10).
ENGLISH 9
Loading ...
Loading ...
Loading ...