Loading ...
Loading ...
Loading ...
6. End of programme - unloading the drum
34
At the end of the programme
The programme is finished when Finish/
Anti-crease appears in the display. The
Start/Stop sensor will no longer light up.
The dryer will switch off automatically
15minutes after the end of the Anti-
crease phase (or 15minutes after the
programme with programmes without
an Anti-crease phase).
Removing the laundry
Only open the door when the drying
process has finished. Otherwise, the
laundry will not be properly dried and
cooled down.
Pull the door open at the side with
the orange marker.
Remove the laundry.
Always remove all items from the
drum.
Items left in the dryer could be
damaged by overdrying when the
dryer is used the next time.
Press the button to switch the
tumble dryer off.
Remove the fluff from the two fluff
filters in the door opening (see
“Cleaning and care - Fluff filters”).
Shut the door with a gentle swing.
Empty the condensed water
container.
Useful tip: The condensed water can
be used for the Steam care programme.
See “Condensed water container -
Preparing the condensed water
container for Steam care”.
We recommend that you drain the
condensed water externally through the
drain hose when drying a full load using
the Cottons and Cottons
programmes. This will avoid having to
empty the condensed water container
during the programme.
Drum lighting
The lighting helps to ensure that all
items are removed from the drum.
The drum lighting will go out
automatically to save energy.
Useful tip: To switch the lighting on
again, open the pull-down menu from
the overview menu and then touch the
sensor.
Loading ...
Loading ...
Loading ...