Loading ...
Loading ...
Loading ...
22
Cleaning and maintenance
ALWAYS UNPLUG THE JUICER WHEN IT IS NOT IN USE AND BEFORE CLEANING. DO NOT UNPLUG THE
JUICER BY PULLING ON THE CABLE.
DO NOT IMMERSE CABLES, PLUGS OR THE JUICER IN WATER OR OTHER LIQUIDS, EITHER PARTIALLY
OR TOTALLY.
1) The juicer must be unplugged from the socket before cleaning. Do not pull on the cable to unplug.
2) You are advised to clean the juicer immediately after use because dried citrus pulp is difcult to remove and
may stain all parts in contact with.
3) By lifting the juice’s container (6) from the body (9), all the used components are out and they can be separated
and rinsed.
4) After rinsing the components as large cone (2), small cone (3), stainless steel strainer (5), juice’s container(6),
they can be placed on the top shelf of the dishwasher. If a dishwashing machine is used, a LOW TEMPERATURE
CYCLE MUST BE USED with very gentle detergent to avoid warp and scratch the plastic parts. The guaranty does not
cover the damages caused by choosing wrong washing cycles of the dishwashing machine.
5) Never leave the motor base (9) or the cable with plug (7) wet. Clean the motor base (9) with a soft damp cloth
(such as a micro-ber cloth) and then dry. Do not use abrasive detergents.
6) Place clean juice container(6), strainer (5), cones (3) (2) and cover (1) back on unit.
7) Before using the juicer again, check that all its parts are correctly assembled and perfectly dry, especially the
motor base (9).
Loading ...
Loading ...
Loading ...