Loading ...
Loading ...
Loading ...
4
Rear Trim Accessories
ATTACHING BACKGUARD (Illustration 3)
Backguards come equipped with Nylon Spacers (See Figure 1), which are needed to space the range o a combustible wall a
prescribed safe distance.
Figure 1
Figure 2
Note: If the back wall is Non-Combustible,
these spacers can be removed. (See Figure 2)
These spacers can also be removed if used with any of the models*
listed below:
• C/VGCC530
• C/VDSC530
• C/VDSC536
• C/VGRT530
• C/VGRT536
*If you have one of these models, the spacers are not
required, even if with a combustible wall.
C/VGCC560 ranges require that two 1” stando spacers be attached to the back of the range when using a range with a backguard
against a combustible surface. (See Figure 3)
Figure 3
Once you determine whether or not your product needs the provided spacers, the backguard is ready to be attached. Simply slide
the backguard down onto the rear of the unit behind the spacers and attach using the (4) screws provided.
Loading ...
Loading ...
Loading ...