Loading ...
Loading ...
Loading ...
ENG - 21
Mode & Level Settings
Function LED Behavior Description
Input Search
The LED indicator
color will change
per specic input.
SETUP > Input Search > OK to initiate an automatic input detection sequence. This is the
same as a long key press of the INPUT button on the remote. Specic inputs will show a
dierent LED color:
• AUX In: Green
• AUX VA: Violet
• Digital Optical: Red
• HDMI 1: Yellow
• HDMI 2: Aqua
• HDMI (eARC): Magenta
Program Remote
Learn
Waiting to learn:
Flash from bottom
to top and back
continuously.
SETUP > PrgRemote > Use the Next/Previous buttons and OK button to toggle and
select and program your TV remote to control the Volume Down, Volume Up, and Mute
functions on your sound bar. See the
Programing the Sound Bar on page 25
section for
more information.
Power LED
Power LED On
SETUP > PwrLED > Use the Next/Previous buttons to enable/disable the Power LED.
Voice notications will also be enabled/disabled.
Power LED O
AV Delay
LED at the bottom
indicates no delay.
SETUP > AV Delay > Use the Next/Previous buttons to increase/decrease the amount of
audio delay. The LED indicators will move to the top with increasing audio delay level.
Reset Audio or
Reset All
All LEDs will ash
3 times when
settings are reset.
SETUP > Reset Audio or Reset All > Use the Next/Previous buttons to reset either Audio
or All settings. Press the OK button to select.
Audio - Only audio settings, such as bass and treble levels, will be reset.
All - All paired Bluetooth devices will be unpaired and all settings will be lost. All
programmed IR remotes will also be removed. See the
Factory Reset on page 24
for
more information.
Input Srch
PwrLED
AV Delay
Reset All
Prg Remote
Loading ...
Loading ...
Loading ...