Loading ...
Loading ...
Loading ...
is within the range of movement of the
door.
Only oper ate the following door s using the
garage door opener:
R
Doors with a safety stop and reversing fea‐
ture.
R
Doors which conform to the current U.S.
safety standards.
Requirements:
R
The vehicle has been parked outside the
garage or outside the range of movement of
the door.
R
The engine is switched off.
R
The ignition is switched on.
%
The garage door opener function is always
available when the ignition is switched on.
#
Check if the transmitter frequency of the
remote control has the frequency range of
280 to 868 MHz.
Radio equipment approval number:
R
NZLMUAHL5 (USA)
R
4112A-MUAHL5 (Canada)
#
Press and hold button 1, 2 or 3 that you
wish to program.
Indicator lamp 4 flashes yellow.
%
It can take up to 20 seconds before the indi‐
cator lamp flashes yellow.
#
Release the previously pressed button.
Indicator lamp 4 continues to flash yellow.
#
Point remote control 5 from a distance of
1 in (1 cm) to 3 in (8 cm) towards buttons
1, 2 or 3.
#
Press and hold button 6 of remote control
5 until:
R
Indicator lamp 4 lights up green contin‐
uously. Programming is complete.
R
Indicator lamp 4 flashes green. Pro‐
gramming was successful. Additionally,
synchronization of the rolling code with
the door system must also be carried out.
#
If indicator lamp 4 does not light up or flash
green: repeat the procedure.
#
Release all of the buttons.
158
Driving and parking
Loading ...
Loading ...
Loading ...