Loading ...
Loading ...
Loading ...
5.
Tighten the front axle bolt.
Torque: 47 lbf·ft (64 N·m, 6.5 kgf·m)
6.
Install the brake caliper and tighten the
fixing bolts.
Torque: 23 lbf·ft (31 N·m, 3.2 kgf·m)
NOTICE
When installing a wheel or caliper into original
position, carefully fit the brake disc between the
pads to avoid scratching them.
7.
Lower the front wheel on the ground.
8.
Apply the brake lever several times. Then,
pump the fork several times.
9.
Raise the front wheel off the ground
again, and check that the wheel rotates
freely after you release the brake.
10.
Check the clearances between each
surface of the brake disc and the brake
bracket (not the brake pads) are
symmetrical.
u If the clearances are not symmetrical,
loosen the right axle pinch bolts and
pull the right fork outward or push
inward to adjust the clearance.
11.
Tighten the left axle pinch bolts.
Torque: 16 lbf·ft (22 N·m, 2.2 kgf·m)
20180723111152_31MFR6900_enu_BOOK Page 101 Monday, July 23 2018 11:20:55 JST
Tire Puncture u Removing Wheels
Troubleshooting
98
Brake bracket
Brake
disc
Loading ...
Loading ...
Loading ...