Loading ...
Loading ...
Loading ...
Fig. 1
Fig. 2
Fig. 3
5
ASSEMBLY INSTRUCTIONS
Assembling the Popcorn Maker
1. Place motor base and all removable parts
on a clean, at surface. Make sure the
motor base is unplugged from the power
outlet and that all parts have been cleaned
and dried thoroughly before assembling.
2. Grasp popping plate by
the handles and place on
top of motor base. Be sure
to line up the notches on
the front and back of the
popping plate with the
grooves on the front and
back of the motor base
(see gure 1).
3. Gently press down on the
handles until each side of
the popping plate rests
rmly in place. Note: The
popping plate is properly
positioned if it rests at on
top of the motor base.
The unit will not function
unless the popping plate is
properly positioned (see gure 2).
4. Grasp the popping bowl
by the handles, and place
it on the popping plate.
Be sure that the handles
on the popping bowl
rest comfortably in the
grooves on the popping
plate (see gure 3).
Note: The bowl cap
should never be on top of popping bowl while
the unit is in use.
5. Plug the popcorn maker into a 120V outlet.
Your popcorn maker is now assembled for use.
OPERATING INSTRUCTIONS
1. Place motor base and all removable parts on a
clean, at surface. Make sure the motor base
is unplugged from the power outlet and that all
parts have been cleaned and dried thoroughly
before assembling.
CAUTION: Do not let water or any other liquid
drip into the base or on the heating plate.
2.
Grasp popping plate by the handles and place
on top of motor base. Be sure to line up the
notches on the front and back of the popping
plate with the grooves on the front and back of
the motor base.
Note: The popping plate is properly posi-
tioned if it rests at on top of the motor base.
The unit will not function unless the popping
plate is properly positioned.
3. Select the amount of popcorn desired from
the chart on page 6.
4. Add the approximate amount of vegetable oil
or canola oil to popping plate.
Note: See Tips and Hints on page 6 for
recommended measurements. Any form of
cooking oil is suitable for use, except olive oil.
5. Measure the amount of kernels using the
included measuring cup and add to the
popping plate.
Note: See Tips and Hints on page 6 for
recommended measurements.
6. Grasp the popping bowl by the handles and
place it on to the popping plate. Be sure that
the handles on the popping bowl rest comfort-
ably in the grooves on the popping plate.
Note: The bowl cap should never be on top of
popping bowl while the unit is in use.
7. Plug the popcorn maker into a 120V outlet.
8. Flip the power switch to the ON position.
The motorized stirring arm will activate, and
the cooking process will begin.
9. The cooking process will conclude when little
to no popping is heard. Flip the switch to the
OFF position and unplug unit from wall outlet.
Note: The unit will remain on until manually
switched to the OFF position.
Loading ...
Loading ...
Loading ...