Loading ...
Loading ...
Loading ...
en
28
Installing the spacers
Remove two screws with screwdriver first, and t ake out
the spacers from plastic bag and fix it to the back of
theappliancethroughthescrewsthen.Thisensures
that there is a minimum distance between the appli
ance and the wall.
Installation dimensions and door opening
angle
W
W1
W2
D
D1
135°130°
W W1 W2 D D1
908 mm
418 mm 277 mm 628 mm 1171 mm
Fixing the door handle
Before you use the product, please check the handles
of the appliance. If a handle is loose, you should fix it
with the hexangular screwdriver i n the clockwise
direction, then it can be used normally.
Aligning the appliance
To ensure that the appliance functions correctly, it must
be set level with a spirit level.
Ø For sufficient leveling and air circulating in the lower
rear section of the appliance, the bottom feet may
need to be adjusted.
Ø To allow the doors to selfclose, tilt back the top
backwards at about 15 mm or 0.5° by turning the
adjustable feet.
Ø Whenever you want to move the appliance,
remember to turn the feet back up, so that the
appliance can roll freely.
Ø The rollers, which are not castors, should be only
used for forward or backward movement. Moving
the refrigerator sideways may damage your floor
and the rollers.
Ø Reinstall the appliance when relocating.
0.5°
15 mm
adjustable bottom feet
Loading ...
Loading ...
Loading ...