Loading ...
Loading ...
Loading ...
Black plate (429,1)
北米Model "A1300BE-C" EDITED: 2017/ 2/ 22
Replacing key battery
The access key fob/transmitter battery
may be discharged under the following
conditions.
. The operation of the keyless access
function is unstable
. The operating distance of the remote
keyless entry system is unstable
. The transmitter does not operate prop-
erly when used within the standard dis-
tance
Replace the battery with a new one.
& Safety precautions
CAUTION
. Do not let dust, oil or water get on
or in the access key fob/trans-
mitter when replacing battery.
. Be careful not to touch or da-
mage the printed circuit board in
the access key fob/tra nsmitter
when replacing the battery.
. Be careful not to allow children to
touch the battery and any re-
moved parts; children could
swallow them.
. There is a danger of an explosion
if the battery is incorrectly re-
placed. Replace only with the
same or equivalent type of the
battery.
. Batteries should not be exposed
to excessive heat such as bright
sunlight, fire or the like.
NOTE
. Replace only with the same or
equivalent type of battery recom-
mended by the manufacturer.
. Dispose of used batteries according
to local laws.
. Mount the battery in the correct
orientation to pre vent fluid leakage.
Be careful not to bend the terminals. It
may result in a malfunction.
. It is recommended that the battery
be replaced by a SUBARU dealer.
. Use a new battery.
. After replacing the battery, confirm
that the transmitter functions properly.
& Replacing battery of access
key fob
CAUTION
When removing or reinstalling the
access key fob cover, make sure
that the plastic part does not come
off or become misaligned.
Battery: Button battery CR2032
1) Release button
2) Emergency key
1. Take out the emergency key.
Maintenance and service/Replacing key battery
– CONTINUED –
11-45
11
Loading ...
Loading ...
Loading ...