Loading ...
Loading ...
Loading ...
6
|
Wolf Customer Care 800.222.7820
INSTALLATION
Preparation
Prepare the nished opening for the rangetop according to
dimensions shown in the illustration on the previous page.
The platform must include a cut-out at the right rear for
electrical and gas supply connections. It must be level to
ensure the cooking surface is level. Refer to the chart below
for minimum base support.
INSTALLATION REQUIREMENTS
PLATFORM
Thickness
3
/4" (19)
BASE SUPPORT MIN
30" Rangetop 200 lb (91 kg)
36" Rangetop 250 lb (113 kg)
48" Rangetop 300 lb (136 kg)
Placement
Use an appliance dolly to move the unit near the opening.
Remove and recycle packing materials.
If a riser has been specied, refer to the installation instruc-
tions packaged with the riser. The riser must be installed
before the rangetop is installed.
Place unit into the opening. Connect gas and electrical.
Connections may need to be made prior to nal placement.
Gas Supply Connection
All connections to the gas piping must be wrench-tightened.
Do not overtighten or allow pipes to turn when tightening.
If a exible metal connector is being used, verify it is not
kinked, then attach the gas supply line to the regulator on
the rangetop. Open the valve and check for leaks by placing
a liquid detergent solution onto all gas connections. Bubbles
around connections indicate a gas leak. If a leak appears,
close the shut-off valve and adjust connections.
Loading ...
Loading ...
Loading ...