Loading ...
Loading ...
Loading ...
c) Hang the furniture door onto the appliance door, making sure that
the brackets on the mounting bracket locate over the adjusting bolts.
c) Use a screwdriver to adjust the gap on the lower section of the
adjusting bolts. The gap should be set to approximately 9 mm (as
shown in the above drawing).
d) Fix the lower bracket to the bottom of the furniture door and the
underneath of the appliance door.
o It is possible to make minor adjustments to the position of the
furniture door using the screws on the top and the bottom of the
appliance door. You should make these adjustments so that the
furniture door is level.
e) Insert the cover plate to the top
of the appliance, this will just clip
into place.
25
Loading ...
Loading ...
Loading ...