Loading ...
Loading ...
Loading ...
Black plate (398,1)
北米Model "A1160BE-C" EDITED: 2014/ 3/ 17
9-12
In case of emergency/In case of a flat tire
25. Insert the power cord of the compres-
sor (3) into the accessory power outlet
(10).
26. Set the ignition switch to the “ACC”
position.
27. Pres s the “ ” (on) side of the
compressor’s power switch (1), wait a
few seconds, and then press the “
” (off)
side of the switch.
28. If the tire pressure is 18 psi (130 kPa)
or more, adjust the tire to the specified
pressure on the tire placard.
If the tire pressure is less than 18 psi (130
kPa), the tire cannot be repaired with
sealant. Do not continue to drive your
vehicle. Contact a SUBARU dealer or
Commercial Road Service for assistance.
NOTE
In cold weather, more time might be
required to complete a repair, and you
might need to drive a longer distance.
In this case, repeat the Steps from (19)
to (26). If the pressure continues to
drop even after repeating this proce-
dure, the tire cannot be repaired with
the repair kit. Do not continue to drive
the car. Contact a SUBARU dealer or
Commercial Road Service for assis-
tance.
29. After sealing the flat tire, immediately
have your vehicle inspected at a SUBARU
dealer or other qualified service facility.
CAUTION
. Drive carefully, obeying legal
speed limits, never driving faster
than 50 mph ( 80 km/h), and
avoiding sudden steering move-
ments.
. Do not exceed a maximum driv-
ing distance of 125 miles (200
km) on a sealant-filled tire.
NOTE
. After sealing the flat tire temporarily,
have the tire repaired or replaced with a
new tire and tire valve as soon as
possible.
. When a tire is repaired with liquid
sealant, the tire pressure warning valve
and transmitter may not operate prop-
erly. If a liquid sealant is used, contact
your nearest SUBARU dealer or other
qualified service shop as soon as
possible. Make sure to replace the tire
pressure warning valve and transmitter
when replacing the tire. You may reuse
the wheel if there is no damage to it and
if the sealant residue is properly
cleaned off.
. The sealant, hose, speed limit label,
and sealant application cap need to be
replaced after using the flat tire repair
kit. Contact a SUBARU dealer for de-
tails.
Loading ...
Loading ...
Loading ...