Loading ...
Loading ...
Loading ...
11
Cybex Owner’s Manual
12. Attach pulley shaft using the pivot shaft and BHSCS.
BHSCS
Pivot Shaft
Washer
Pulley Shaft
Pulley/Cable
13. Connect pulley/cable to pulley bracket.
14. Verify the two belts are routed properly (one belt from the cam to the pulley bracket and the
other belt connecting to the arms.)
15. Connect the weight stack belt to the belt clamp of cam.
Set
Screws
Cam
Install rubber feet
1. Remove each (standard) cone-shaped shipping support using a 3/4” socket or wrench.
2. Be sure machine is in desired location.
3. Place rubber feet (supplied with machine) on each foot of the frame.
4. Cut shipping tie securing top weight.
5. Lift top weight and turn the Increment Weight Adjusting Knob to select 15 lbs (three
increment weights each side.)
6. Remove the three Phillips head screws securing the top (back) shroud and carefully remove
the shroud.
Phillips Head
Screw (3)
Loading ...
Loading ...
Loading ...