Loading ...
Loading ...
Loading ...
4
C.Factory resets. In standby mode, press Hr+Min button for 2S at the same time,
the buzzer will sound three times, then the factory settings will be restored
(clock, holding time, appointment time, insulation position, factory reset).
2.THE CLOCK SETTINGS
A.In standby mode, press “Hr” or press “Min” once, the clock will flash and enter
the clock setting.
B.In the clock setting, press the “Hr” button once and the hour will increase one;
if you press and hold the “Hr” button for 1s, the hour will increase rapidly, and
the hour will increase by 2 hours in every 0.2s until the display shows 11:00AM.
Then the clock go to 12:00 PM and then restart again. (12-hour system: AM
and PM will switch when the time changes from 11 to 12 o'clock)
C.In the clock setting, press the “Min” button once and the minute will increase
1 minute; if you press and hold the “Min” button for 1 second, the minute will
increase rapidly, and the minute will increase by 2 minutes in every 0.2s until
the display shows 0:59. Then go back to 0:00 and then restart.
A.In the standby mode, press the “Auto Off” button once, the display shows “AUTO
OFF” and the clock flashing at “0:30” (the default power-on time is 0:30,and the
default keep warm time is 30 minutes), and then enter the keep warm time
setting mode.
B.In the keep warm time setting (warm time and AUTO OFF will flash), press “Hr”
one time, the hour will increase 1 hour; if you press and hold “Hr” for 1 second,
the hour will increase rapidly. The 0 to 4 hours will be repeated when pressing
the “Hr”. Press the “MINUTE” button once, the minute displays 30 or 0, and the
maximum keep warm time is no more than 4 hours.
C.In the keep warm time setting (warm time and AUTO OFF will flash), press “Brew”
or no any operation in 5s (flash 5 times) to select the keep warm time, the
buzzer Beep, then machine exits to standby state.
3.KEEP WARM TIME SETTING
Loading ...
Loading ...
Loading ...