Loading ...
Loading ...
Loading ...
Basic operation en
39
2
1
Switching on the appliance
▶
Press .
The Eco 50° programme is set by
default.
The Eco 50° programme is an es-
pecially environmentally friendly
programme and ideal for normally
soiled tableware. It is the most effi-
cient programme for the combina-
tion of energy/water consumption
for this type of tableware and evid-
ences conformity with the EU Eco-
design Order.
If you do not perform any actions
on the appliance for 15 minutes,
the appliance will automatically
switch off.
Setting a programme
To adjust the wash cycle to the soil-
ing level of the tableware, select a
suitable programme.
▶
Press the right programme button.
→"Programmes", Page21
Setting additional functions
You can set additional functions to
complete the washing programme
selected.
Note:The additional functions which
can be used depend on the pro-
gramme selected.
→"Programmes", Page21
▶
Press the button for the relevant
additional function.
→"Additional functions", Page23
a The additional function is set and
the additional function button
flashes.
Setting timer programming
You can delay the start of the pro-
gramme by up to 24hours.
1. Press .
2. Press or repeatedly until the
display shows the right time.
Depending on the setting of the
time display, the end of the pro-
gramme is shown on the display
either with "Finish in" (e.g.
3h25min) or "Finish at" (e.g.
15:20hours). You can change this
setting in the Basic settings
→Page41.
3. To activate timer programming,
press .
Tip:To deactivate timer program-
ming, press for approx.
3seconds.
Starting the programme
▶
Press .
a The display shows the programme
information.
a The programme has ended when
the display shows "Finished".
Loading ...
Loading ...
Loading ...