Loading ...
Loading ...
Loading ...
Magic Chef® Water Dispenser Product Guide
7
Installation & Setup
• Remove the exterior and interior packing.
• Place your appliance on a level floor that is strong enough to support the dispenser when it is
fully loaded. If it does not sit level on the floor, adjust either of the front feet to level the unit.
• Place the appliance away from direct sunlight and sources of heat (stove, heater, radiator, etc.).
Direct sunlight may affect the acrylic coating and heat sources may increase electrical
consumption. Extreme cold ambient temperatures may also cause the appliance to malfunction.
• Allow 5 inches of space between the water dispenser and the wall. This allows for proper air
circulation to cool the compressor.
• Plug the appliance into a properly installed and grounded wall outlet only. Do not cut or remove
the third (ground) prong from the power cord under any circumstances. Any questions
concerning power and/or grounding should be directed toward a certified electrician or the
manufacturer.
• This water dispenser is not recommended for outdoor use.
• Do not place the dispenser in an area where the temperature may fall below freezing (32° F).
• Keep the area around the dispenser free of dust and dirt.
• Keep the reserve supply of water bottles away from excessive heat and light.
• Never unplug the water cooler, except for maintenance or transport.
Before connecting the appliance to a power source, let it stand upright for
approximately 2 hours. This will reduce the possibility of a malfunction in the cooling
system from handling during transportation.
Loading ...
Loading ...
Loading ...