Loading ...
Loading ...
Loading ...
en-us Operating the Dishwasher
38
Switching the appliance on
1.
Turn the water supply on fully.
2.
Open the door.
3.
Press the On/Off button (.
The display of the last selected
wash cycle flashes. This wash
cycle remains selected if no other
wash cycle button 0 is pressed.
The expected wash cycle duration
flashes on the display 8.
Select any desired option.
4.
Press Start button P.
Wash cycle sequence starts.
Note: Your dishwasher is protected
against unintentional operation. If the
appliance door remains open for
more than 4 seconds after pressing
the Start button, the operation will be
paused. Press the Start button again
and close the appliance door.
Time display
When a wash cycle is selected the
remaining wash cycle time is shown
on the display 8.
The wash cycle time is determined
during the wash cycle by the water
temperature, the amount of dishes,
as well as the degree of soiling and
may vary (depending on the selected
wash cycle).
Delay Start
You can delay the start of the cycle in
one hour increments up to 24 hours.
To set Delay start:
1.
Open the door and press the
On/Off button ( . Select a cycle.
2.
Press the Delay button from the
wash cycle options H until the
displayed time corresponds with
your requirements.
3.
Press the Start button P to
activate Delay start.
To cancel Delay start:
1.
Open the door and press the
Delay button until œ:‹‹ is
indicated on the digital
display 8.
2.
Press the Start button P to
save setting.
Note: Your dishwasher is protected
against unintentional operation. If the
appliance door remains open for
more than 4 seconds after pressing
the Start button, the operation will be
paused. Press the Start button again
and close the appliance door.
œ:‹‚ 1 hour delay
œ:ƒ… 24 hours delay
Loading ...
Loading ...
Loading ...