Loading ...
Loading ...
Loading ...
Black plate (161,1)
北米Model "A2470BE-B" EDITED: 2010/ 9/ 21
button, you can display the various func-
tions of the rear view image display and
the electronic compass display based on
how long you press the buttons.
Power button
Gear
position
Period of
time button
is pressed
Function
displayed
Except
R (reverse)
Briefly
Auto-dimming
function ON/OFF*
R (reverse) Briefly
Rear view image
display: ON/OFF*
mode
6to12
seconds
Enter the lan-
guage selection
mode
12 to 15
seconds
Rear view image
display: opera-
tional/non-opera-
tional mode
*: The setting returns to “ON” as a default
setting every time the ignition switch is turned to
the “OFF” position.
Compass button
Gear
position
Period of
time button
is pressed
Function
displayed
Except
R (reverse)
Briefly
Electronic com-
pass display ON/
OFF
3to6
seconds
Enter the com-
pass zone setting
mode
6to9
seconds
Enter the com-
pass calibration
mode
! Auto-dimming function
The auto-dimming function is an anti-glare
capability which automatically red uces
glare coming from headlights of vehicles
behind you.
By pressing the power button, the auto-
dimming function is toggled on or off.
When the auto-dimming function is on, the
function indicator will illuminate in green.
Even with the mirror in anti-glare mode,
the mirror surface turns bright if the
transmission is shifted into the “R” (re-
verse) position. This is to ensure good
rearward visibility during reversing.
The mirror has a photosensor attached on
both the front and back sides. During
nighttime driving, these sensors detect
distracting glare from vehicle headlights
behind you and automatically dim the
mirror to eliminate glare and preserve
your vision. For this reason, use care not
to cover the sensors with stickers, or other
similar items. Periodically wipe the sen-
sors clean using a piece of dry soft cotton
cloth or an applicator.
NOTE
When cleaning the mirror, use a paper
towel or similar item dampened with
glass cleaner. Do not spray glass
cleaner directly on the mirror surface.
By doing so, the sprayed glass cleaner
could enter the inside of the mirror
Instruments and controls 3-37
– CONTINUED –
3
Loading ...
Loading ...
Loading ...