Loading ...
Loading ...
Loading ...
4
JBL CINEMA SB150
JBL CINEMA SB150 TOP PANEL
CONTROLS
Standby
Bluetooth
Optical audio in
AUX-in analog
Source LED
behavior
LED
Color
Power Button: The Power button toggles the JBL CINEMA SB150
between ON and Standby. When the JBL CINEMA SB150 is in Standby mode
(the LED indicator is amber), press this button to turn the system ON (the button
LED indicator turns white).
NOTE: The JBL CINEMA SB150 and wireless subwoofer will
switch into standby mode after 10 minutes of inactivity.
Source Button: The Source can be changed by pressing the
Source Selection Button. Cycle through options to select your preferred Source
in this order: AUX > OPTICAL > AUX. Source button only circles between AUX
and optical. Bluetooth source uses Bluetooth button separately.
Volume Up/Down Buttons: Press the ( – ) button to reduce
the volume, press the ( + ) button to increase the volume.
Mute Button: Press the mute button to mute the system.
Bluetooth
®
(BT): The Bluetooth button is used to set the JBL
CINEMA SB150 into Bluetooth mode. You can pair the system with Bluetooth-
enabled devices using this button (see page 5).
JBL CINEMA SB150 SOUNDBAR
REAR PANEL CONTROLS AND
CONNECTIONS
Software
update only
Power
Input AC
Optical
Remove
Caps
Aux-in
Power Input AC: Connect the supplied AC power cable to
this input.
Aux input (Analog Audio in): You can connect an analog
audio device to the CINEMA SB150 by using the supplied 3.5 mm
to RCA cable.
Optical (Digital Audio in): If your TV, disc player or cable/
satellite tuner has an optical digital output, use the included optical cable to
connect it here. Once a Dolby Digital audio stream is sensed by the soundbar,
its Dolby Digital decoding becomes active.
USB Port: For software update only.
JBL CINEMA SB150 SUBWOOFER
CONTROLS AND CONNECTIONS
PAIR
PAIR
Wireless Pairing button and LED indicator:
Press this button to initiate wireless pairing between the subwoofer and the
soundbar. See Pairing the Units for Wireless Operation,
on page 5, for more information.
• The LED lights amber continuously when the subwoofer is on and linked to
the soundbar.
• The LED slowly flashes amber when the subwoofer is on and the wireless
link is not established between the subwoofer and the soundbar.
• The LED rapidly flashes amber during the wireless pairing process.
Power Input AC: Connect the supplied AC power cable
to this input.
1) Power on / Standby
2) Source selection
3) Volume +/-
4) Mute
5) Bluetooth source /
Pairing
1) Power Input AC
2) Optical Audio in
3) Analog Audio in
4) USB (Software
update only)
1) Power input AC
2) Wireless pairing indicator
3) Wireless pairing button
1 2 43
1
2
3
Loading ...
Loading ...
Loading ...