Loading ...
Loading ...
Loading ...
Taking Care of the Unexpected
229
If the Transmission Is Not
Functioning Properly
If the ATV does not move, even through “–” is not blinking in the
gear position indicator:
If your ATV won’t move, it is possible the transmission system has
malfunctioned. Use the following procedure to manually override
the clutch of the transmission.
1.
Shift the transmission into 2nd gear.
2.
Apply the parking brake (page 53).
3.
Turn the ignition switch to the OFF (w) position.
4.
Loosen the screw (1) and release the lock plate (2).
5.
Locate the emergency valve access hole (4) inside the left front
fender. Using a screwdriver, turn the emergency valve (3) all the
way in. With the engine running, slowly open the throttle to
move the ATV forward.
6.
See your dealer as soon as possible.
When the battery is low (or dead):
•See If the Battery Is Low (or Dead), page 244.
LEFT FRONT LEFT SIDE
(1) screw
(2) lock plate
(3) emergency valve
(4) emergency valve access hole
(3)
(1)
(2)
(4)
19 TRX500FA6 (ED)-32HR66400.book 229 ページ ２０１８年５月２２日 火曜日 午前１１時８分
Loading ...
Loading ...
Loading ...