Loading ...
Loading ...
Loading ...
Cabinet Drawing
June 2008
Page 4
SCCG50 & SCCP50 - Outdoor Model
Installation and User's Manual
Installation Notes
Built In Situations: If a finished floor is to be installed in the area after the ice machine has been built in,
shims the expected thickness of the floor should be installed under the unit to keep the machine level
with the planned floor level.
Installations on a slab: Use a pump model and pump the water to the point of drainage. Pump models
will pump 1 story (10 feet) high.
Installations over a crawl space or basement: Either gravity drain or pump model units may be used, if
there is not enough room behind the machine for a drain/waste receptacle, the drain will have to be
below the floor.
Note: When installed in a corner, the door swing may be limited due to handle contact with the wall or
cabinet face.
14 7/8"
AIR IN
AIR OUT
.75
SHEET METAL DOOR FRONT
.63 MIN. CABINET DOOR
29 1/4"
1"
LEG ADJUSTMENT
(4) PLACES
33 3/8" MIN.
34 3/8" MAX.
22"
2 3/4"
4"
3 3/4"
1 1/2"
2 1/2"
3 1/4"
7 3/8"
115 V
POWER CORD
DRAIN
FLEXIBLE TUBING
3/8 I.D. PUMP MODEL (INCLUDED)
5/8 I.D. GRAVITY MODEL (NOT INCLUDED)
POTABLE WATER INLET
1/4" COMPRESSION FITTING
3 7/8"
20 3/8"
FLOOR DRAIN
ACCESS HOLE
Loading ...
Loading ...
Loading ...