Loading ...
Loading ...
Loading ...
13
OPERATION
STARTING AND STOPPING THE DETHATCHER (See Figure 4)
I M P O R T A N T
Prior to dethatching the lawn, the lawn should be mowed to a height of approx. 2” (0.05 m). Do-
ing this will lengthen the life span of the tines and prevent unnecessary motor overload on the
dethatcher.
STARTING THE DETHATCHER
• Plug the dethatcher into an approved outdoor extension cord.
• Press and hold the Power button (1). This makes the bale switch operational.
• Pull the bale switch (2) upward to the handlebar to operate.
STOPPING THE DETHATCHER
• Release the bale.
CIRCUIT BREAKER (See Figure 4)
This dethatcher is equipped with a circuit breaker in order to protect the supply circuit from short-
circuit overloads.
Follow these steps if the switch pops out:
• Release the trigger switch, and allow the dethatcher to stop and cool down for a minute.
• Press the circuit breaker in order to reset it. Resume operation (See Figure 4.)
Follow these steps if the switch pops out again shortly after the rst time:
• Allow the dethatcher to stop and cool down for 15 to 30 minutes.
• After the dethatcher has cooled down, press the circuit breaker in order to reset it. Resume
operation.
If the circuit breaker does not stay in, or if it continues to pop out during operation, please call
1-888- 909-6757 for assistance.
Fig. 4
Power
Button
Bale
Switch
Circuit
Breaker
Loading ...
Loading ...
Loading ...