Loading ...
Loading ...
Loading ...
5
OPERATING INSTRUCTIONS
Note: When reinstalling the refrigerator and freezer
doors, ensure that the rubber gaskets are making
a good seal with the cabinet before tightening the
screws.
DOOR REVERSAL INSTRUCTIONS
If the appliance is placed on its back or side for any length of time during this process, it must be allowed
to remain upright for 6 hours before plugging it in to avoid damage to the internal components.
Before beginning, ensure that you have a fl at screwdriver, a cross screwdriver, a wrench and the
components in the accessory bag as follows:
1. Left door hinge cover
2. Left upper door closer
3. Left lower door closer
1. Unscrew the top hinge cover and disconnect the connectors of the door switch and harness.
2. Remove the top hinge. Remove the refrigerator door from the cabinet. Place the door on a blanket or other
similar surface to avoid damage.
3. Remove the door switch from the right hinge cover. Install the door switch on the left hinge cover found in the
accessory bag.
4. Remove the screw cover from the top left side of the cabinet.
5. Remove the center hinge. Remove the freezer door from the cabinet. Place the door on a blanket or other
similar surface to avoid damage.
6. Lay the appliance on its back, on a blanket or similar item to avoid damaging the fl ooring. Remove the
adjustable feet and the lower hinge.
7. Remove the hinge pins from the upper and lower hinges with a wrench. Flip the hinges over and reinstall the
hinge pins on the other side of the hinges.
8. Install the lower hinge on the left side of the cabinet. Install the adjustable feet.
9. Remove the rubber gaskets from the refrigerator and freezer doors, rotate them 180° and reinstall them.
10. Remove the upper and lower door closers from the right side of the refrigerator and freezer doors. Install the
left door closers found in the accessory bag on the left sides of the refrigerator and freezer doors.
11. Install the freezer door on the cabinet. Install the center hinge.
12. Install the refrigerator door on the cabinet. Install the top hinge. Reconnect the door switch and harness
connectors.
13. Install the screw cover on the top right side of the cabinet.
Loading ...
Loading ...
Loading ...