Loading ...
23 Body guard 1/8in. (3mm)
24 Body guard 3/16in. (5mm)
Not shown: cleaning brush, pouch
This symbol indicates that the
product can be rinsed under
running tap water.
1
2
432
1098
6
2
1
5
1
2
7
1311 12
161514
1917 18
25
28
23
26
24
27
222120
Charging
Battery status indications
- When the battery is almost empty, the
battery status indicator lights up orange
(Fig. 2).
- When the product is charging, the
battery status indicator ashes white
slowly (Fig. 3).
- During quick charge, the battery status
indicator ashes white. After approx.
5 minutes of charging, the product
contains enough power for one
cordless trimming session.
- When the battery is fully charged, the
battery status indicator lights up white
continuously (Fig. 4).
Note: After approx. 30 minutes, the light
goes out automatically.
Charging
Charge the product before rst use and
when the display indicates that the battery
is almost empty. When the product has
charged for 3 hours, it has a cordless
operating time of up to 6 hours.
- Charging, recharging or using the
product at temperatures below 40°F
(4,5°C) or higher than 95°F (35°C)
adversely aects the lifespan of the
battery.
- If the product is subjected to a major
change in temperature, pressure or
humidity, let the product acclimatize for
30 minutes before use.
1 Make sure the product is turned o.
2 Insert the small plug into the product
and put the power plug in any 120V AC
outlet (Fig. 5).
3 After charging, remove the power plug
from the wall outlet and pull the small
plug out of the product.
Note: An adapter plug may be necessary
for cord usage in some foreign countries.
Use an attachment plug adapter of the
proper conguration for power outlet.
Quick charge
After approx. 5 minutes charging, the
product contains enough power for one
cordless trimming session.
Using the product
Always check the product and all
accessories before using. Do not use the
product or any accessory if it is damaged,
as this may cause injury. Always replace a
damaged part with one of the original type.
Note: This product can be used without
cord or directly from the power outlet.
Note: Switch o and clean the product
and attachments after each use.
- Use this product for its intended
household use as described in this
manual.
- For hygienic reasons, the product
should only be used by one person.
- Trimming is easier when the skin and
hair are dry.
- Be careful when trimming without a
comb as the product will trim every hair
it touches when it is turned on.
Detaching and attaching cutting elements
1 To detach a cutting element, push
upwards against the teeth of the cutting
element and take it o the handle (Fig. 6).
2 To attach a cutting element, insert
the lug of the cutting element into the
guiding slot at the front and push the
back of the cutting element onto the
product (‘click‘) (Fig. 7).
Detaching the precision shaver and nose
trimmer
1 Place your nger on the arrow at the
back of the attachment and push it o
the handle in the direction of the arrow
(Fig. 8).
Attaching and detaching guards
1 To attach any type of guard onto a
cutting element, slide the front part of
the guard onto the teeth of the cutting
element. Then push down the center of
the guard with your ngers or the palm
of your hand (‘click’) (Fig. 9).
2 To detach any type of guard from the
cutting element, carefully pull its back
part o the product and then slide it o
the cutting element (Fig. 10).
Note: When trimming for the rst
time, start by using the guard with the
maximum trimming length setting to
familiarize yourself with the product.
Switching the product on and o
1 Press the on/o button once to switch
the product on or o (Fig. 11).
Attachments for use on beard
Full-size hair trimmer
Use the full-size hair trimmer without a
guard to trim hair close to the skin
(to a length of 1/32in./0.5mm) or to create
clean lines around your beard, neck and
sideburns.
1 To trim hair close to the skin, place the
at side of the cutting element against
your skin and make strokes against the
direction of hair growth (Fig. 12).
2 For contouring, hold the cutting
element perpendicular to the skin and
move it upwards or downwards with
gentle pressure (Fig. 13).
Beard guards
Attach a beard guard to the full-size hair
trimmer to trim your beard and moustache
evenly. The product comes with 5 beard
guards. The hair length settings are
indicated on the guards. The settings
correspond to the remaining hair length
after trimming.
Guard inch mm
Stubble guard 3/64in. 1mm
Stubble guard 5/64in. 2mm
Beard guard 1/8in. 3mm
Beard guard 3/16in. 5mm
Beard guard 9/32in. 7mm
Loading ...
Loading ...