Loading ...
Loading ...
Loading ...
20
Troubleshooting
POSSIBLE
PROBLEM
POSSIBLE CAUSE
SLOUTIONS
The
appliance
does not
operate.
Not plugged in.
Ensure the appliance is
plugged in and the power outlet
has power.
The appliance is turned off.
Turn on the appliance.
The circuit breaker tripped
or a blown fuse.
Replace the broken fuse or
reset the breaker.
Sabbath mode may be
enabled.
See Operation page and verify
Sabbath mode is disabled.
The
appliance is
not cold
enough.
Check the temperature
control setting.
Adjust the set temperature.
External environment may
require a higher setting.
Keep the appliance away from
sunshine or other heat sources
.
The door is opened too
frequently or for long
periods of time.
Close the door tightly and do
not open the door too
frequently or for a long period
of time.
The door gasket does not
seal properly.
Ensure the door gasket is not
loose.
Demonstration mode may
be enabled.
See Operation page and verify
Demonstration mode is
disabled.
The cooler does not have
sufficient ventilation.
Read and follow the
“installation clearance
requirements” section.
The cooler has restricted
air flow due to too much
storage.
Open space in the cabinet to
allow air flow.
Turns on and
off frequently.
The room temperature is
hotter than normal.
Run the refrigerator at the
appropriate ambient
temperature.
The door gasket is not
sealing properly.
Make sure the door gasket is
properly sealed.
The door is open too often.
Minimize the number of times
the door is opened.
The cooler does not have
the suggested ventilation.
Read and follow the
‘installation clearance
requirements” section.
The door is not closed
completely.
Make sure the door is
completely closed.
Loading ...
Loading ...
Loading ...