Loading ...
Loading ...
Loading ...
4
www.alen.com 1-800-630-2396
USING YOUR AIR PURIFIER
Operating Your Unit:
1. Plug your air purier into a grounded outlet.
2. Touch Power Button in the center to start the air purier. When your unit is on, the
lights will illuminate. To turn off display lighting, press the Power Button. To turn off the
air purier, touch the Power Button again after the lights have turned off. The LIGHT
Button can also be used to control the display lighting.
3. The BreatheSmart 45i has a Color Ring around the Power Button indicating air quality,
as measured by the particle sensor.
4. Press IONIZER to activate the ozone-safe ionizer. Activation of the ionizer enhances
your unit’s ability to remove airborne particles (similar to the way dust is attracted to a
TV screen). Press the ionizer button again to turn off.
5. FILTER life Indicator — There are three lights above the FILTER button: Green, Yellow,
and Red. The Green light will be illuminated for most of the life of the lter. The Yellow
light will come on shortly before your lter should be replaced. This is the ideal time to
order a new lter. The Red light will be illuminated when it is time to replace the lter.
6. After changing the lter, hold the FILTER button down for ve seconds. This will reset
the Red light to Green.
7. Touch LIGHT to adjust display lighting (LO, HI, or OFF). LO dims lights by 50%.
PLEASE NOTE:
The BreatheSmart 45i has capacitive touch control panels. The buttons only operate
with a quick, light touch. Holding the buttons down will not activate the controls properly.
A chime will indicate that the control has registered your touch.
COLOR MEANING
Blue Very low level of airborne particles detected
Green Low level of airborne particles detected
Orange Medium level of airborne particles detected
Red Signicant level of airborne particles detected
Purple Very signicant level of airborne particles detected
Loading ...
Loading ...
Loading ...