Loading ...
Loading ...
Loading ...
34 35
Error Tone Cause Solution
Three beeps
RoboVac can get stuck in the
following scenarios:
• When RoboVac does not have
enough power to reverse when
on the edge of a staircase that is
covered by a rug.
• When RoboVac tries to reverse due
to exposure to strong sunshine,
but cannot reverse due to physical
barriers in the way.
• When RoboVac reverses due to
exposure to strong sunshine, but
continues to be exposed to strong
sunshine after reversing for 3
seconds.
• Restart cleaning in a new
location.
• Use a physical barrier to
block o the problem area.
Four beeps RoboVac’s power level is too low.
Manually charge RoboVac for at
least 5 hours.
Solid red indicator light
Error Tone Cause Solution
One beep
RoboVac’s left/right wheel is
stuck.
Turn o RoboVac and remove any hair
or debris from the left/right wheel.
Two beeps RoboVac’s side brush is stuck.
Turn o RoboVac and remove any hair
or debris from the side brush.
Three beeps RoboVac’s suction fan is stuck.
• Turn o RoboVac, then remove and
empty the dust collector.
• Make sure the suction inlet is not
blocked by any hair or debris.
Four beeps RoboVac’s rolling brush is stuck.
Turn o RoboVac and remove any hair
or debris from the rolling brush.
Specifications
Input
19 V
0.6 A
Battery Voltage DC 14.4 V
Power Consumption 40 W
Battery Type
DC 14.4 V
Li-ion 2600 mAh
Dust Collector Capacity
0.6 L
Cleaning Time Max. 100 mins
Charging Time 300 - 360 mins
Input
19 V
0.6 A
Output
19 V
0.6 A
Customer Service
For FAQs and more information, please visit www.eufylife.com.
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong
www.eufylife.com
support@eufylife.com