ElectriQ CD20PRO-LE 20 Litre Smart App Alexa Low Energy Dehumidifier

User Manual - Page 10

For CD20PRO-LE. Also, The document are for others ElectriQ models: CD12PRO-LE

PDF File Manual, 27 pages, Read Online | Download pdf file

CD20PRO-LE photo
Loading ...
Loading ...
Loading ...
9
QUICK REFERENCE GUIDE
Power Button: Press to turn the dehumidifier on and off.
Oscillation Button: Press once to make the louvre swing and press again to lock at 45 degrees,
press again to lock at 90 degrees. Do not operate the unit if the self-opening louvres do not open on
power on.
Timer: Press the timer button, then use the buttons to adjust the duration of the
timer (1-24 hrs, start/ stop timer).
If set while the unit is running: The number will represent the number of hours the unit will operate before
turning off. This will not be affected if the unit enters defrost mode or the tank is emptied and reinserted.
If set while the unit is in standby: the set number represents the period in hours after which the unit will start.
To cancel the start / stop mode press the timer button again.
Up and Down Buttons: During the High or Low modes when the unit is displaying the
current relative humidity, these buttons can be used to adjust the desired humidity level.
The desired relative humidity can be set between 35 and 80% in 5% increments.
SMART Mode: This is designed for maximum convenience and maintains the ideal
domestic environment humidity level of 50-55% while saving electricity. This is the
default mode and is recommended for most users.
During operation, the compressor will operate until the desired humidity is reached and then will stop. The
economical low fan mode will continue to operate. The fan moves the air around the room, ensuring the entire
air in the room is processed and humidity correctly measured.
To achieve drier air, or while drying laundry, put the unit in High mode and use the down button to select a lower
desired humidity (e.g. 35-45%).
LAUNDRY MODE: When drying clothes, it is advised for the dehumidifier to operate continuously with maximum
water extraction until the water tank is full. Set the unit to the High mode, and set the desired humidity level
between 35%-50%. 35% is very dry and is hardly achievable in a UK domestic environment. As such the unit will
work until the water tank is full when set to 35%. Set the louvres to swing mode or to 45 degrees directing the
airflow onto the clothes. Do not place clothes directly over any of the vents on the dehumidifier. Make sure that
there is nothing blocking the hot air exhaust airflow and for best results place the laundry within 1.5 meters of the
dehumidifier.
NOTES:
If a permanent drainage pipe is fitted, the unit will not stop operating. Setting the desired humidity to
around 35% is good for laundry mode, a quick-drying boost, or in emergencies. It is not recommended for
long normal operation in a domestic or office environment.
To allow more moisture in the air, press the up button and set to a higher desired humidity (e.g. 60-70%).
We recommend setting the Humidity to 50-55%. This is great for domestic operation and dry storage
Setting the humidity to 60% is great for personal comfort and applications where 50% RH is considered
too dry
Setting the humidity to 70% is ideal for unoccupied properties or where an economical run is needed
without the need to reduce the humidity further.
Loading ...
Loading ...
Loading ...