Loading ...
Loading ...
Loading ...
WASH TEMPERATURE selector
Can be turned in either direction
This washing machine is equipped with this device for
setting the wash temperature you want. We recommend
that the temperature shown on the label inside garments
should never be exceeded.
The most suitable temperature and cycle for each type of
fabric is shown in the programme guide.
To protect fabrics, if the variable temperature dial has
accidentally been set too high than stated in the
programme guide, the machine will lower the temperature automatically.
I
9
CREASE GUARD button
The Crease Guard function minimizes creases as much as possible with a uniquely
designed anti-crease system that is tailored to specific fabrics.
MIXED FABRICS - the water is gradually cooled throughout the final two rinses with no
spinning and then a delicate spin assures the maximum relaxation of the fabrics.
DELICATE FABRICS – final two rinses with no spinning and then the fabrics are left in
water until it is time to unload. When you are ready to unload, press the Crease Guard
button – this will drain and spin ready for emptying
RESISTANT FABRICS AND WOOLLENS - after the final spin, the fabrics are left in water
until it is time to unload. When you are ready to unload, press the Crease Guard button –
this will drain and spin ready for emptying
If you do not want to spin the clothes and activate drain only :-
- Turn the appliance off by pressing the on / off button
- Select Programme
- Switch on the appliance again by pressing the on / off button
SUPER RAPID button
By pushing this button the time of the wash programme is reduced to a maximum of 50
minutes depending on the programme and the temperature selected. The super rapid
button can be used for washing loads of 1 to 5,5 kg.
(This button can be utilised only on cottons and synthetic programmes).
F
E
8
SPIN SPEED CONTROL
ROTATES IN BOTH DIRECTIONS
The spin cycle is very important to remove as much water
as possible from the laundry without damaging the fabrics.
You can adjust the spin speed of the machine to suit your
needs. By adjusting the control, it is possible to reduce the
maximum speed, and if you wish, the spin cycle can be
cancelled altogether-position .
NOTE:
THE MACHINE IS FITTED WITH A SPECIAL ELECTRONIC
DEVICE, WHICH PREVENTS THE SPIN CYCLE SHOULD THE
LOAD BE UNBALANCED. THIS REDUCES THE NOISE AND
VIBRATION IN THE MACHINE AND SO PROLONGS THE LIFE
OF YOUR MACHINE.
H
PROGRAMME Selector
Note: never turn the dial anti-clockwise (Turn it
clockwise and do not press the on/off button before
selecting the programme.)
The tables in the washing section describe the various programmes and give the number or
symbol to select for them.
IMPORTANT : IF YOU NEED TO CHANGE A PROGRAMME THAT
HAS ALREADY STARTED – SWITCH OFF THE MACHINE BY THE
ON / OFF BUTTON AND THEN MOVE THE PROGRAMME DIAL
TO THE CORRECT POSITION. IF YOU DO NOT PRESS “OFF”
BEFOREHAND, THE DIAL WILL AUTOMATICALLY MOVE TO ITS
INITIAL POSITION.
L
OK
Loading ...
Loading ...
Loading ...