Loading ...
Loading ...
Loading ...
7
GB
This booklet contains important instructions concerning the use of your appliance.
These instructions cover a number of appliances, therefore depending on the type of appliance,
some details may vary slightly.
Keep this booklet for consultation and if you sell the appliance give it to the new buyer.
READ CAREFULLY BEFORE INSTALLING OR USING THE APPLIANCE.
- ALL MAINTENANCE OPERATIONS, INCLUDING REPLACEMENT OF THE POWER SUPPLY CABLE, SHOULD THIS
BECOME NECESSARY, MUST BE CARRIED OUT BY THE AFTER-SALES SERVICE OR A QUALIFIED ELECTRICIAN.
This appliance is intended to come into contact with foodstuffs and conforms to D.L. 108 of 25.01.1992 (European Directive
89/109/EEC).
This appliance has been designed, manufactured and retailed in compliance with:
LOW VOLTAGE Directive 73/23/EEC
EMC Directive 89/336/EEC
Marking Directive 93/68/EEC
Energy Efficiency Directive 96/57/EEC
• ENVIRONMENTAL INFORMATION
This appliance has been designed and manufactured taking into account the need to safeguard the environment.
To ensure the same care when of scrapping, given the presence of pollutants or inflammable materials such as lubrication oil in the
compressor, dispose of the appliance with care, delivering it to your local authorized collection centre for waste disposal and
scrapping.
This appliance does not contain CFCs (the refrigerant circuit contains R134a) or HFC (the refrigerant circuit contains R600a –
ISOBUTANE). To check which gas your appliance contains, refer to the appliance data plate.
• For appliances with ISOBUTANE (R600a)
Isobutane is a naturally occurring low environmental impact gas. Caution is required, however, because Isobutane is flammable.
Therefore, before connecting the appliance to the power supply, it is essential to ensure that refrigerant pipelines are not damaged.
INSTALLATION
- Appliance installation should be carried out by two persons in order to avoid injury to persons or damage to objects.
The appliance must be installed upright on a strong, sturdy surface. This is the only way to guarantee no obstacles in the refrigerant
circuit. Use the adjustable feet (V) to level the appliance.
- Do not expose the appliance to high ambient temperatures or direct sunlight.
Ideally, the appliance should be installed in a cool, dry, well ventilated area, away from sources of heat such as radiators, heaters or direct
sunlight. Do not place any heat-producing appliances (microwave ovens, toasters, etc.) on top of the refrigerator/freezer.
- For the climatic class of your appliance, refer to the data plate affixed to the rear of the appliance: fig.1 (W)
if “SN”: appliance operates at ambient temperatures between +10°C and +32°C;
if “N”: appliance operates at ambient temperatures between +16°C and +32°C;
if “ST”: appliance operates at ambient temperatures between +18°C and +38°C;
if “T”: appliance operates at ambient temperatures between +18°C and +43°C;
- Never obstruct the air vent fig.1 (F). For appliances not equipped with an air vent, ensure sufficient space is left between the rear of the
freezer and the wall so as to allow hot air to exit freely.
Leave a space of at least 20mm between the rear of the appliance and the wall, and 100mm between the top of the appliance and any
overhead wall units. Use the spacers if supplied. fig.1 (U).
- Ensure easy access to the power socket so that the appliance can be disconnected from the mains when necessary.
IMPORTANT!
Wait at least two hours before connecting the appliance to the power supply in order to ensure the refrigerant circuit is fully
efficient and avoid possible malfunctions.
• RATING PLATE
The identification plate is affixed to the rear of the (W) appliance.
Loading ...
Loading ...
Loading ...