Loading ...
Loading ...
Loading ...
19
!1
Using two people lift and hang
the range hood using the keyhole
slots (refer to F). Make sure the
wood bracket fits into the recess
on the back of the range hood.
!2
Level the range hood and tighten
the3/4” (19mm) screws in the
keyhole slots.
!3
From inside the range hood, drive
four or six 3/4” (19mm) screws
(depending on model) through
the holes indicated (refer to G)
into the wooden bracket.
!4
Drill a 3/8” (9.5mm) hole through
the center of the holes indicated
in H into the wall. Insert two wall
plugs into the drilled holes.
Tighten the range hood to the wall
plugs by installing the 3/4” (19mm)
washers onto the screws supplied
with the wall plug, then tighten.
!5
Attach the duct to the 10” (254mm)
transition or the 8” (203mm)
duct rings and screws (not supplied)
and seal with aluminum tape.
G
F
H
EN
Note: For wall installations the optional duct transition should be fitted to the range
hood prior to wall mounting. Please refer to ‘Duct transition assembly’ for details.
Loading ...
Loading ...
Loading ...