Loading ...
Loading ...
Loading ...
29OPERATION
ENGLISH
• The displayed temperature is the target temperature, and not the actual temperature of the refrigerator.
The actual refrigerator temperature depends on the food inside the refrigerator.
e Fresh Air Filter
The Fresh Air Filter helps remove odors from the refrigerator. The Fresh Air Filter has two settings, Auto
and Power. In Auto mode, the Fresh Air Filter cycles on and off in increments of ten minutes on and 110
minutes off. If set to the Power mode, the Fresh Air Filter stays on continuously for four hours, cycling
on and off in increments of ten minutes on and five minutes off. After four hours, the Fresh Air Filter
switches back to Auto mode.
•Press the Fresh Air Filter button repeatedly to toggle between Power mode and Auto mode.
NOTE
• Replace the air filter when the g icon turns on. After replacing the air filter, press and hold the Fresh Air
Filter button for three seconds to turn the icon light off. Replace the air filter approximately every six
months.
• Refer to the Replacing the Fresh Air Filter section for details.
f Lock
The lock function disables every other button on the display.
• When power is initially connected to the refrigerator, the lock function is off.
• To lock the control panel buttons, press and hold the Lock button until the
k icon appears in the
display and the function is activated.
• To disable the function, press and hold the Lock button for approximately three seconds.
g Water Filter
Replace the water filter when the h icon turns on. After replacing the water filter, press and hold the
Water Filter button for three seconds to turn the icon light off. Replace the water filter approximately
every six months.
h Wi-Fi
The Wi-Fi button, when used with the LG ThinQ app, allows the refrigerator to connect to a home Wi-Fi
network. Refer to Smart Functions for information on the initial setup of the application.
The f icon shows the status of the refrigerator's network connection. The icon illuminates when the
refrigerator is connected to the Wi-Fi network.
Press and hold the Wi-Fi button for 3 seconds to connect to the network. The icon blinks while the
connection is being made, then turns on once the connection is successfully made.
i Water & Ice Type
Select the desired dispenser mode from the buttons on the dispenser control panel. Press the
dispenser switch with a glass or other container to dispense cubed ice, water or crushed ice.
Changing the Craft Ice Mode
NOTE
• This feature is only available on some models.
•The Freezer button can also be used to set the Craft Ice mode to either 3 ICE or 6 ICE.
1 Touch any button on the control panel to activate it.
2 Press and hold the Freezer button for 3 seconds until the control panel beeps and the current ice
mode appears.
Loading ...
Loading ...
Loading ...