Loading ...
Loading ...
Loading ...
IMPORTANT SAFETY INSTRUCTIONS
Don’t use an extension cord
If possible, connect the refrigerator to its own
individual electrical outlet to prevent it and other
appliances or household lights from causing an
overload that could cause a power outage.
Accessibility of Supply Plug
The refrigerator-freezer should be so positioned that
the supply plug is accessible for quick disconnection
should an accident happen.
Supply Cord Replacement
If the supply cord is damaged, it must be replaced
by the manufacturer or its service agent or a
similarly qualified person in order to avoid a hazard.
FEED WATER PIPE INSTALLATION
Before installation
• Automatic ice maker can be installed only by
manufacturer.
• Automatic ice maker operation needs water pressure
of 147~834 kPa (1.5~8.5 kgf/cm
2
) (That is, an instant
paper cup (180 cc) will be fully filled within 3 sec.).
• If water pressure does not reach the rating
147 kPa (1.5 kgf/cm
2
) or below, it is necessary to
purchase a separate pressure pump for normal
automatic icing and cool water feed.
• Keep the total length of the feed water pipe tube within
8 m and be careful for the tube not be bent. If the tube
is 8 m or longer it may cause trouble in water feed
owing to the drain water pressure.
• Install the feed water pipe tube at a place free from
heat.
WARNING
• Connect to potable water supply only.
• Refer to instructions with water filter kit for installation.
WARNING
• The refrigerant and insulation blowing gas used in the
appliance require special disposal procedures. When
disposal, please consult with service agent or a
similarly qualified person.
WARNING
• Please do not use a dishwasher to clean the lower
drawers; the high temperature may cause damage to
the baskets which make them unusable.
5
WARNING
A dedicated outlet should be used.
• Using several devices at one outlet may cause fire.
• If unit is connected to an
earth leakage breaker it
may trip resulting in spoiled
food. This could occur due
to power supply
circumstances, and may
not necessarily mean a refrigerator malfunction.
Do not allow the power plug to face upward
or to be crushed at the back of the
refrigerator.
1. When connecting the power
Prevent the power cord from being squeezed
or imprinted if the refrigerator is pushed in
after the power plug is extracted during the
installation.
When moving your appliance away from the
wall, be careful not to roll over the power cord
or to damage it in any way.
It becomes the cause of fire or electric shock.
Do not allow the power cord to be bent or
crushed by the heavy objects.
It may damage the power
cord to cause fire or
shock.
Loading ...
Loading ...
Loading ...