Loading ...
Loading ...
Loading ...
7 8
OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS
BEFORE FIRST USE
1. Remove all packaging materials and check to ensure that all parts and accessories are
accounted for. Read all stickers and remove ones that are not permanent.
2. Remove and hand wash the water reservoir, the milk reservoir, the portafilter, portafilter
baskets, measuring scoop, drip tray, and removable coaster with a mild detergent and water.
Rinse and dry well. Only the metal baskets and coaster are top-rack dishwasher safe. All
other parts are NOT dishwasher safe.
3. Before first use, you must prime the unit (clean and remove any packaging debris)
according to the directions below.
IMPORTANT–PRIME THE UNIT BEFORE FIRST USE
To prime the unit, follow these steps:
1. Fill the water reservoir to between the “Min” and “Max” markings on the tank.
2. Remove the milk reservoir. (Tilt it up first, then pull out.) Fill the milk reservoir with water
(not milk) to between the “Min” and “Max” markings on the tank and return it to unit. (To
insert it, tilt down and push it firmly into place.)
3. Place a large heatproof cup or mug on the metal coaster set over the drip tray. (Note the
coaster is reversible to make the height adjustable.)
4. Set the froth strength to Extra. Use the silver froth tube lever to position the froth dispensing
tube inside the cup.
5. Place an empty portafilter basket in the portafilter.
6. Fit the portafilter onto the brew head unit, being sure it’s locked in place. (See p. 11 for more
information on placing the portafilter.)
7. Plug in the unit and turn it on. (The power button is located on the side toward the bottom.)
8. Press the DOUBLE CAPPUCCINO button.
9. The button will blink as the unit preheats; do not press the button again or you will
cancel the function.
10. Let the cup fill with water from the brew head and from the froth dispensing tube.
When the brew cycle function ends, the unit will beep three times. Carefully dispose of
the water in the cup and in the milk reservoir. The unit is now primed and ready for use.
CHOOSE THE RIGHT SIZE CUP
With 15 bars of pressure, the Espresso Maker allows for a wide variety of coffee drinks
from a tiny espresso to a large latte. See the graph below to choose the right size cup.
Be aware that the actual amount will vary depending on such variables as the coffee
grind and froth amount. Note that you can flip the metal coaster over the drip tray
over to change the height of the cup under the brew head.
DRINK SHOTS VOLUME (APPROX.)
Espresso Single 1.75 oz
Espresso Double 3.25 oz
Cappuccino Single 3.5 oz
Cappuccino Double 6.25 oz
Latte Single 5.75 oz
Latte Double 10 oz
Loading ...
Loading ...
Loading ...