Loading ...
Loading ...
Loading ...
25
US
HT-XT3
4-558-560-13(1)
D:\NORM'S JOB\SONY HA\SO160014\HT-XT3 (PMRF
04)\4558560131_USCaFRLaES (UC2)\US\050SET.fm
masterpage:
Right
Settings and Adjustments
[Receiver]: This system is in receiver
mode which enables it to receive and
output audio from the remote device.
[Transmitter]: This system is in
transmitter mode which enables it to
send audio to the BLUETOOTH receiver
(such as headphones). If you switch the
input of the system, “BT TX” appears in
the front panel display.
[Off]: The BLUETOOTH power is turned
off and you cannot select the [Bluetooth
Audio] input.
You can connect to a remote device by
using One-touch listening function even
though you have set [Bluetooth Mode] to
[Off].
[Device List]
Display a list of paired and detected
BLUETOOTH receivers when [Bluetooth
Mode] is set to [Transmitter] (page 24).
[Bluetooth Standby]
You can set the [Bluetooth Standby] so
that the system can be turned on by a
BLUETOOTH device even when the
system is in standby mode. This
function is only available when you set
[Bluetooth Mode] to [Receiver] or
[Transmitter].
[On]
: The system turns on automatically
when you establish a BLUETOOTH
connection from a paired BLUETOOTH
device.
[Off]: Off.
If you set [Quick Start/Network Standby] to
[Off] and [Bluetooth Standby] to [On], the
system can be turned on by a BLUETOOTH
device, but BLUETOOTH connection fails.
[Bluetooth Codec - AAC]
This function is only available when you
set [Bluetooth Mode] to [Receiver] or
[Transmitter].
[On]
: Enable AAC codec.
[Off]: Disable AAC codec.
You can enjoy high quality sound if the
AAC is enabled. In case you cannot listen
to AAC sound from your device, select
[Off].
If you change the [Bluetooth Codec - AAC]
setting when a BLUETOOTH device is
connected, the codec setting is only
reflected after the next connection.
[Bluetooth Codec - LDAC]
This function is only available when you
set [Bluetooth Mode] to [Receiver] or
[Transmitter].
[On]
: Enable LDAC codec.
[Off]: Disable LDAC codec.
If you change the [Bluetooth Codec - LDAC]
setting when a BLUETOOTH device is
connected, the codec setting is only
reflected after the next connection.
LDAC is an audio coding technology
developed by Sony that enables the
transmission of High-Resolution (Hi-Res)
Audio content, even over a BLUETOOTH
connection. Unlike other BLUETOOTH
compatible coding technologies such as
SBC, it operates without any down-
conversion of the Hi-Res Audio content*,
and allows approximately three times
more data** than those other technologies
to be transmitted over a BLUETOOTH
wireless network with unprecedented
sound quality, by means of efficient coding
and optimized packetization.
* Excluding DSD format contents.
** In comparison with SBC (Subband
Coding) when the bitrate of 990 kbps
(96/48 kHz) or 909 kbps (88.2/44.1 kHz)
is selected.
Note
Note
Note
Note
Tip
Loading ...
Loading ...
Loading ...