Loading ...
Loading ...
Loading ...
CB500FA only
When removing and installing the wheel, be
careful not to damage the wheel speed
sensor and pulser ring.
#
Front Wheel
Removal
1.
Place your motorcycle on a firm, level
surface.
2.
Cover the right side of the front wheel
and brake caliper with protective tape or
cloth.
3.
On the right side, remove the mounting
bolts and brake caliper.
u Support the brake caliper assembly so
that it doesn't hang from the brake
hose. Do not twist the brake hose.
u Avoid getting grease, oil, or dirt on the
disc or pad surfaces.
u Do not pull the brake lever while the
brake caliper is removed.
u Take care to prevent the brake caliper
from scratching the wheel during
removal.
20160902115018_31MJWB100_enu_BOOK Page 99 Friday, September 02 2016 11:57:25 JST
Tire Puncture u Removing Wheels
Troubleshooting
96
Right side collar
Mounting bolts
Tape or cloth
Wheel speed sensor
Brake caliper
Pulser ring
CB500FA only
CB500FA only
Loading ...
Loading ...
Loading ...