Philips HTS3571/98 5.1 Home Theatre

User Manual - Page 50

For HTS3571/98.

PDF File Manual, 57 pages, Read Online | Download pdf file

HTS3571/98 photo
Loading ...
Loading ...
Loading ...
50
The contents of the USB ash drive cannot
be read.
The USB ash drive format is not
compatible with this Home Theater
System.
Drive is formatted with different le
system which is not supported by this unit
(e.g. NTFS).
Maximum size of memory supported is
160 GB.
No sound from the rear speakers and the
indicator on the wireless receiver blinks
continuously for more than one minute.
(For HTS3578W only)
Ensure that all required connections are
connected and carry out the following
steps:
1) Press
.
2) Press INFO . A screen is displayed.
3) Press 1 , then press the SURR button
within 5 seconds. ‘PAIRING SUCCESS’ is
displayed.
4) If ‘PAIRING FAIL is displayed, repeat
steps 1 to 3.
No sound from TV programme.
Connect an audio cable from the AUDIO
input on this Home Theater System to the
AUDIO output on your TV. Then press
AUDIO SOURCE repeatedly to select the
corresponding audio input source.
No surround sound effect from the speakers.
Press SURR to select a correct surround
sound setting.
If the Home Theater System does not
support DTS playback, press AUDIO
SYNC to select other audio track.
Ensure that the source you are playing
is recorded or broadcast in surround
sound (Dolby Digital, etc).Sound cannot
transmit through HDMI connection if the
connected device is non-HDCP compliant
or only DVI-compatible. Make an analogue
or digital audio connection.
Play
DivX video les cannot be played.
Ensure that the DivX le is encoded
according to the ‘Home Theatre Pro le’
with the DivX encoder.
Ensure that the DivX video le is complete.
The aspect ratio of the screen is not aligned
with the TV display setting.
The aspect ratio is xed on the disc.
DivX subtitle does not display correctly.
Ensure that the subtitle le name is the
same as the movie le name.
Select the correct character set:
1) Press
SETUP .
2) Select [Preferences] , then press
.
3) Select [DivX Subtitle] , then press OK .
4) Select the character set that supports
the subtitle.
EN
1_hts3571-78W_98_en.indd 501_hts3571-78W_98_en.indd 50 2/4/2009 4:04:54 PM2/4/2009 4:04:54 PM
Loading ...
Loading ...
Loading ...