Philips HTD3250/12 2.1 Home Theatre

User Manual - Page 16

For HTD3250/12.

PDF File Manual, 30 pages, Read Online | Download pdf file

HTD3250/12 photo
Loading ...
Loading ...
Loading ...
14 EN
3 Select a picture and then press OK to
start the slideshow.
4 Press to stop slideshow.
5 Press again to stop music.
Radio
Listen to FM radio on your home theater, and
store up to 40 radio stations.
Note
AM and digital radio are not supported.
If no stereo signal is detected, you are prompted to
install the radio stations again.
1 Connect the FM antenna to the FM
ANTENNA on your home theater.
For the best reception, place the
antenna away from your TV or other
sources of radiation.
2 Press RADIO to switch to radio source.
» If you have already installed the radio
stations, the last channel that you
listened to is played.
» If you have not installed any radio
stations, the message AUTO
INSTALL...PRESS PLAY appears on
the display panel. Press (Play).
3 Use the remote control to listen or to
change radio stations.
Play buttons
Button Action
/
or
Alphanumeric
buttons
Select a preset radio station.
Navigation
buttons
Left/Right: Search for a radio
station.
Up/Down: Fine tune a radio
frequency.
Button Action
Press to stop the installation
of radio stations.
Press and hold to erase the
preset radio station.
RADIO Manual:
1) In radio mode, press
RADIO.
2) When a radio frequency
blinks, press OK to store
the radio station.
3) Repeat step 1 and 2 to
store other stations.
Automatic:
In radio mode, press and
hold RADIO for three
seconds to reinstall all the
available radio station.
Tuning grid
In some countries, you can toggle the FM tuning
grid between 50 kHz and 100 kHz. When you
switch the tuning grid, all preset radio stations
are erased.
1 Press RADIO to switch to radio source.
2 Press .
3 Press and hold (Play) to toggle between
50 kHz or 100 kHz.
MP3 player
Connect a MP3 player to play audio les.
What you need
An MP3 player.
A 3.5mm stereo audio cable.
1 Using the 3.5mm stereo audio cable,
connect the MP3 player to the AUDIO IN
connector on your home theater.
If you use 6.5mm stereo audio cable,
connect the MP3 player to your
home theater using a 3.5mm - 6.5mm
converter jack.
Loading ...
Loading ...
Loading ...