Loading ...
Loading ...
Loading ...
Advanced Operations
33
GB
Use the camera's built-in or another attached flash unit as the controller
to fire the HVL-F32M.
1 Attach this flash unit to the camera and turn the
power of this flash unit and camera on.
2 Set the camera to wireless-flash mode, then confirm
that [WL] is displayed on the LCD panel of this flash
unit.
For details on the setting method of the camera, refer to the
operating instructions of the camera.
3 Remove this flash unit from the camera, then attach
the mini-stand to this flash unit. (page 31)
4 Make sure that the built-in flash is fully charged, or
attach another flash unit to the camera.
• Confirm that [RMT] is displayed on the LCD panel of this unit. If
[CTRL] is displayed, press the -/RMT button to display [RMT].
[A] Using an HVL-F32M that is separated from
the camera (off-camera flash)
Built-in flash
HVL-F32M
Controller
or
Loading ...
Loading ...
Loading ...