Loading ...
Loading ...
Loading ...
10
Complete Installation
NOTE: Handle air conditioner gently.
1. Make sure the free end of the ground wire is outside of the
cabinet.
2. Insert air conditioner into cabinet.
REMEMBER: Make sure the free end of the ground wire is
outside of the cabinet.
3. Connect green ground wire to cabinet base with ground
screw.
Position ground wire pointing straight up. Put excess ground
wire between coil and air conditioner cabinet.
4. Remove the 2 front panel screws from air conditioner base.
5. Insert front tabs of front panel into top of cabinet and swing
front into place.
6. Attach bottom front of panel with front panel screws. Replace
control knobs (on some models).
NOTE: For through-the-wall installations, if needed, install
molding around room side of cabinet.
7. Plug into a grounded 3 prong outlet.
8. Press RESET on the power supply cord plug.
A. Make sure the free end of the ground wire
is outside of the cabinet.
WARNING
Excessive Weight Hazard
Use two or more people to move and install
air conditioner.
Failure to do so can result in back or other injury.
A
WARNING
Electrical Shock Hazard
Connect green ground wire to ground screw.
Failure to do so can result in death or electrical shock.
A. Green ground wire
B. Ground screw
A
B
+
+
+
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
WARNING
Loading ...
Loading ...
Loading ...